PDA

View Full Version : Stearing



Draginfly
06-06-2011, 07:46 PM
Just purchases a 2011 RT and find that the front end is a bit "fishy" while making right hand turns and slight pulling to the right when going straight. The dealer hasn't heard of this before. Any suggestions? Thanks!

ThreeWheels
06-06-2011, 07:50 PM
It's a long thread, see if this is of any help.

http://www.spyderlovers.com/forums/showthread.php?t=19631&highlight=journey+good

By the way, the alignment tool is due in the local shops early this week.

docdoru
06-06-2011, 07:53 PM
Just purchases a 2011 RT and find that the front end is a bit "fishy" while making right hand turns and slight pulling to the right when going straight. The dealer hasn't heard of this before. Any suggestions? Thanks!
:welcome: and :congrats: for your :spyder:


By the way, the alignment tool is due in the local shops early this week.
This is realy good news! :2thumbs::clap::ohyea::thumbup:

NancysToy
06-06-2011, 08:56 PM
Pulling to one side is often a result of the steering sensors not being zeroed. If the steering angle sensor and the steering torque sensor do not match, the DPS will try to steer itself. Have you dealer center the steering, hook to BUDS, and reset the sensors. If that doesn't help, it may be toed out a bit, and will need the alignment checked.

Lamonster
06-06-2011, 09:00 PM
:agree: get it on the BUDS

:welcome:

StriperKing
06-06-2011, 10:31 PM
Pulling to one side is often a result of the steering sensors not being zeroed. If the steering angle sensor and the steering torque sensor do not match, the DPS will try to steer itself. Have you deale rcenter the steering, hook to BUDS, and reset the sensors. If that doesn't help, it may be toed out a bit, and will need the alignment checked.
Scotty gave me this same advice and it fixed mine. Was just like yours. As it turns out the steering sensors were a couple of degrees off.

Marker
06-07-2011, 12:42 PM
Just purchases a 2011 RT and find that the front end is a bit "fishy" while making right hand turns and slight pulling to the right when going straight. The dealer hasn't heard of this before. Any suggestions? Thanks!

:welcome: & :congrats:

Bob Denman
06-07-2011, 02:06 PM
:agree: get it on the BUDS

:welcome:

So... This BUDS for you! :thumbup: :ohyea: :yes: