PDA

View Full Version : lost a part of the bike? any websites?



Dubaian
08-14-2010, 04:54 PM
when i reached home i realized the back light piece is not there, is there any website that i can order the piece from or should be through the dealer only?

http://www.spyderlovers.com/forums/attachment.php?attachmentid=8209&stc=1&d=1281822859

yooper
08-14-2010, 05:43 PM
Here's a link to Robs Performance parts fiche.
http://robsperformance.com/fiche_select1.asp?cat=Motorcycles&mfg=Can-Am

You might be able to find a closer dealer with a parts fiche. I've ordered parts from Robs and always got great service.

Capt John
08-14-2010, 06:05 PM
I don't think you can buy just the lens. Some have had a problem loosing the lens and have replaced the whole set up with a universal unit from Walmart and here is a post that has a link for an aftermarket replacement.

http://www.spyderlovers.com/forums/showthread.php?t=18497&highlight=light+replacement

canam9
08-14-2010, 07:29 PM
I don't think you can buy just the lens. Some have had a problem loosing the lens and have replaced the whole set up with a universal unit from Walmart and here is a post that has a link for an aftermarket replacement.

http://www.spyderlovers.com/forums/showthread.php?t=18497&highlight=light+replacement
:agree::ani29:

Big Arm
08-14-2010, 07:34 PM
Those lenses are noted for falling off, :gaah: and cannot be purchased separately. The whole fixture needs to be ordered fom the dealer if you want the same one,..... but many have been replaced under warranty. When you get the new one, replace the short screw with a longer one and put a small amount of silicone on the screw and around the edge of the lens. :2thumbs:

boborgera
08-14-2010, 07:35 PM
when i reached home i realized the back light piece is not there, is there any website that i can order the piece from or should be through the dealer only?

http://www.spyderlovers.com/forums/attachment.php?attachmentid=8209&stc=1&d=1281822859

I'm afraid you'll have to order the whole box,. pieces are not available.:sour:
Go after market, Like the previous post's suggest.
Another thought are you still in warranty that might be covered

ArmyJoe
08-14-2010, 08:54 PM
Those lenses are noted for falling off

Yup, I was just talking about that this evening with SpyderWolf and his wife.

ntxYguy2009
08-14-2010, 09:38 PM
Magic Man where are you when we need you? How about coming up with a cool LED replacement unit?

Please - no spider theme design on it. Something that looks stock (like the third tail light) and and retails for under $50.

David

Raptor
08-15-2010, 12:51 AM
Here is the factory replacement From the parts fiche:

*LICENCE LIGHT (Includes 21 to 25 ) 710001291 $41.99

I couldn't get the graphic from the fiche, but you know what it looks like anywyay! :D

fastfraser
08-15-2010, 07:26 AM
Some pretty good LED replacements out there . Ebay for sure. Sorry I think it has a :spyder2: theme. Imagine that a :spyder2: theme for a :spyder2: !

Dubaian
08-15-2010, 07:45 AM
just ordered it, thnx buddy :2thumbs:


Here is the factory replacement From the parts fiche:

*LICENCE LIGHT (Includes 21 to 25 ) 710001291 $41.99

I couldn't get the graphic from the fiche, but you know what it looks like anywyay! :D

Roy's Bassets
08-15-2010, 07:58 AM
This what I replace mine with, go to http://www.roysbassets.com/picture.htm scroll down to the picture of the rear view of the spyder. Got it on ebay.

taggtr
08-15-2010, 08:03 AM
http://epc.brp.com/SiteMods/BRP_Public/BRP_Public_Login.aspx?ReturnUrl=%2fIndex.aspx%3fla ng%3dE%26s1%3dda86f24f-deeb-4a10-a0c4-52c50529148c&lang=E&s1=da86f24f-deeb-4a10-a0c4-52c50529148c

Raptor
08-15-2010, 05:34 PM
just ordered it, thnx buddy :2thumbs:

You are most welcome. There are some great alternatives out there, but a brand new special edition bike should probably remain stock. For a little while at least!! :D

COOLMACHINE
08-15-2010, 06:38 PM
There needs to be a recall on this part!!!! This is Bull&%*&....

Dubaian
08-15-2010, 07:12 PM
:agree:, i thought am the only one, but after this post i realized a lot had the same problem


There needs to be a recall on this part!!!! This is Bull&%*&....

Raptor
08-15-2010, 08:40 PM
There needs to be a recall on this part!!!! This is Bull&%*&....

:agree:, parts shouldn't just be falling off of brand new machines!