How Do I Wire BOTH Fiamm High & Low Note Horns?

[sandeejs]

So, I'd like to add a Fiamm High Note Horn to my Fiamm low note horn. Both are disc horns. I was thinking just attach one to the other. Then I thought about not exploding anything, so I thought I'd ask wiser minds.

Thanks in advance!!!!!

[hypurone]

Just run jumper wires from one to the other. You will need "piggyback" terminals to give you the secondary jumper connections to put on the first horn.... I have this currently set up on mine with two horns... Here is one option:

https://www.amazon.com/Heschen-Piggyback-Terminal-Connector-0-5-6-0mm%C2%B2/dp/B09XGPWN18/ref=sr_1_6?dib=eyJ2IjoiMSJ9.3IU2tEi31BzxPciCzeyhQd rTM2NeMVBzdgnCBLtrDiH-fGnGFEePMhD0z5pG-pRxr_9GxyKGOPdTxvdqv95WGGRpLUc6K8OePYmGL3dzKkCAK0k XuYKnUXz_f9oSsUpBxjXzpMJEukmkeGXkE_y_QAoLQ9L9Y6K8k vk4YgpyqTJk_aM6izXsML4VShJe0B8bksm2_WnGUEa6u5-l1iZjVOhK3UY-YiwQtt2GjjVngyA.-ZCuglNrJ-_TD7ZBzGhfgb7aopELJ7gOryniVSdGCTY&dib_tag=se&keywords=spade+connector+piggyback&qid=1712942348&sr=8-6

I have had my horns installed like this since I got the byke in 2016 with NO issues... You just need to make sure the power draw is within the fuse rating.

[sandeejs]

Thanks, Hypurone. I've got a jerry rigged solution set up, pending Amazon delivery.

[ReRose]

I added dual horns on my Yamaha FJR and just made a positive and negative jumper wires that plugged into the factory harness. Never a problem but now the wife wants dual horns on her 2020 Spyder RTL so I will be laying on the ground doing the same wiring thing to her Can Am.

[BajaRon]

As long as you're using the proper wire gauge to handle the load, should be no problem with jumping from one to the other.