What are you all using for Phone Holders on the handle-bars?

[Tango]

What are you using for a phone holder on the handlebar? Right now I have the X-Grip from Ram. I see they now have an adjustable rigid mount. Is that more secure? :dontknow: TIA :thumbup: Tom :spyder:

[FrogmanDave]

LaMonster cuff and Phone Phang. Although I recently bolted a ram ball to the handlebar clamp and have the Phone Phang there now.

[IGETAROUND]

I'm using a ram ball attached to a Quad Lock for over 70K without any incidents of detachment nor damage to my phone. I'm using the cheaper non cushioned Quad Lock, the up scale cushioned wasn't available when I started using it, no problems with phone.

Al in Kazoo

[RapidSpyder]

Spydercuff with tackform
201921

[2dogs]

Track form/ramball center handlebar mount from Motorcycle Dave. Otter Box case also.

[jchadwi]

Spydercuff with Phone Phang. Holds my iPhone 12 mini with Otter box case.

[SLICE]

Spydercuff with tackform
201921.


I copied and pasted the above as I was to lazy to type it all out, so I figured RapidSpyder has exactly what I have so why not copy and paste.

I did not steal his photo as that would be wrong.

Wow that was a lot of useless typing.

[RapidSpyder]

I copied and pasted the above as I was to lazy to type it all out, so I figured RapidSpyder has exactly what I have so why not copy and paste.

I did not steal his photo as that would be wrong.

Wow that was a lot of useless typing.

Lol :roflblack:

[Motorcycledave]

There is only one, the very best strongest safest All metal NOT PLASTIC phone mount is
the TACKFORM, made of billet aluminum then machined and anodized the springs are
stainless steel. Do you want to trust your $1000 dollar phone to some plastic holder
not me.... Dont mess around with less than the best, Call me 7 days a week
9:00AM to 8:00PM Pacific time 209-887-3283

201924201924201924201924
201922201923201926
201925

[RULINGCHAOS]

RAM Mounts Quick-Grip XL Phone Holder with Ball RAM-HOL-PD4-238AU with B Size 1" Ball
https://www.amazon.com/gp/product/B07V6ZS2HG/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

Absolutely rock solid on my Galaxy S23 Ultra.

201928 201929

[vito1943]

The Can-Am Center Mount/Short Reach from Motorcycle Dave's, which attaches to the center mount of the handlebars in lieu of one of the four bolts that holds that center mount works outstandingly for me. I have real confidence in this all steel phone holder and use it every time I ride my 2021 RT. Its the middle one shown in Post #9 of this thread. It comes with a rubber extra that can be put over the four corners of the phone, just for extra safety, but I never feel the need for using that. The basic steel holder is rock solid for my Iphone 13.

[bigbadbrucie]

Spyder-cuff from LaMonster with the quad-lock for me. Solid mount with little or no vibration.

[linguine]

Howdy do, Kids

I use this, but mounted to my existing ball mount on my left handlebar. VERY sturdy,
https://www.amazon.com/dp/B08DQVM1JX?psc=1&ref=ppx_yo2ov_dt_b_product_details

[Motorcycledave]

https://youtu.be/CZ47MlxHSz4
201931 201931 201931
201932

[Copperman]

I use Lamonster's Spyder Cuff, a Ram Ball and phone mount. The phone mount is adjustable to fit your phone.

[Bfromla]

:congrats: All of you that found something that works for you :thumbup: personally, I prefer leaving my phone in my pocket. Bluetooth to headset np - Zumo 660GPS is on the bars (try only look at when/if needed) bars otherwise bare except for a few event wrist bands collected. :shocked:

201935 201936

[Majaste]

Like poster #12, I use a Quad-Lock setup but with vibration dampener and QI wireless charger. You have to purchase a phone specific case but I can secure my phone (S23 Ultra) on my bike, car, and anything/anywhere else I have a matching mount.

201941

[ClayJ]

RAM Mounts RAM-HOL-UN10BU X-Grip Large Phone Holder - It holds my Galaxy S23 Ultra with a gorilla case.

I've used X-Grip since about 2007 on my wing and it held even some massive bumps and dips through the years and many phones and holders.

[slhanks004]

I have a 22 RTL. I use a Lamonster top cuff on the LH bar with a 1" RAM ball mount, then a 4" RAM clamp and then a RAM phone holder.
201944

[PaladinLV]

What are you using for a phone holder on the handlebar? Right now I have the X-Grip from Ram. I see they now have an adjustable rigid mount. Is that more secure? :dontknow: TIA :thumbup: Tom :spyder:

Using a QuadLock vibration free mount!
AJ

[Tango]

Many thanks to all who have responded. :firstplace: Tom :spyder:

[shakin_jake]

Here ya go Tom

https://live.staticflickr.com/65535/51757995728_cde4e495b5_4k.jpg

Bought it from LaMonster


Best,



Jake
Reddick Fla.
It’s never too late to have a happy childhood

[troop]

I have, and use, a RAM Quick Grip XL, Tackform and Lamonster Phone Phang. For security, I'd rank them: Quick Grip, Tackform, Phone Phang. For convenience: Tackform, Phone Phang, Quick Grip. I use the Tackform/Quick Grip for my phone and the Phone Phang for my IPod. The Tackform has a noticeably stronger grip than the Phone Phang. My .02

[JonShadow]

I also use the Quad-Lock with the vibration damper on the Spyder and it has been rock solid. I also use a Quad-Lock mount in my truck. The truck mount doesn't have the locking lever and the phone is still secure. Seems like good products.

[CloverHillCrawler]

I use the Tackform and the center mount from Dave. Works great.

[M109Dreamer]

Quad lock with wireless charger on a Ram ball mount.

[kroache]

I use the Tackform and the center mount from Dave. Works great.

Same setup for me. Very pleased with this mount.

[poli]

Mob Armor with Ram ball mount.

[Motorcycledave]

202052 202052 202052
202053 202053 202053

Replace that SPRINGY 4 ARM FLIMSY THING
that pushes the buttons on your phone with this....
202053 202053202053
Call me today and get yours. it goes right onto the Ram Ball arm....
209-887-3283
202054

[kbirdsong]

This:

202107

[shakin_jake]

That’s nice red paint


Best,


Jake
Reddick Fla.
It’s never too late to have happy childhood