Installed a Rear trunk lid lock - Works great!

[safecracker]

Installed a rear trunk lid lock. Works great. Bruce https://www.canamspyderaccessories.com/rt-2010-2019-3d-printed-rear-trunk-holder/

[BLUEKNIGHT911]

Installed a rear trunk lid lock. Works great. Bruce https://www.canamspyderaccessories.com/rt-2010-2019-3d-printed-rear-trunk-holder/

Thanks again Bruce for the TEMPLATE of this device ..... I traced it onto a small piece of scrap " Trex " ( plastic wood " and made my own, this stuff isn't super strong but enough for this project. It is extremely easy to cut and shape..... I shaped it slightly different so it would work better ( imho :roflblack:) ...... I'm surprised the " how to video " didn't advise removing the passenger backrest.... having access from both sides makes installing 10 X's easier ..... If anyone wants a copy mail me a stamp and I'll send it to you .....

PS: ... after making this I decided ... to NOT cut out the shape as pictured, it's much easier to cut out the shape and Leave the " Thumb " piece off .... then add it later by gluing a similar shaped THUMB piece .... If you see the shape you will understand ./.....Mike :thumbup:

PPS: .... for anyone thinking copying this may be illegal .... it's not, just so long as you're only making one for yourself ..... ;)

[ThreeWheels]

Installed a rear trunk lid lock. Works great. Bruce https://www.canamspyderaccessories.com/rt-2010-2019-3d-printed-rear-trunk-holder/

Anybody have one of these for the 2020+ RTL ?

[BLUEKNIGHT911]

Anybody have one of these for the 2020+ RTL ?

If you look at the LINK Bruce posted ..... this is for 2010 to 2019 ..... JMHO .... Mike :thumbup: