The Most Powerful Swaybar for F3 and RT

[Martin Slovakia]

Hy guys, I am upgrading this Sea to Sky for my bit heavier customer and appart from custom build shocks, we have throw in this most powerful swaybar
this is actually installation video and video about all of the upgrades will come on weekend.


https://youtu.be/H0c0S-nuPgw

you can get this SWAYABAR only at MartinTheVlogger shop link is here:
https://www.martinthevlogger.com/product-page/sway-bar-can-am-Motorcycles-Spyder

[FrogmanDave]

Nice!

[Cobwebs]

Excellent video Martin. I have a similar Aussie made bar fitted to my F3 and can vouch for it's effectiveness in the sport position. Haven't tried the touring or comfort setting, that's not my thing but don't doubt it would still be a notable increase over stock. Mine came with a small packet of grease to use on the locating bushes as well. Instructions said plastic links were ok to reuse but I opted for the alloy versions as I could flex the plastic ones which to me defeated the purpose of the bar a bit.:thumbup:

[Martin Slovakia]

you know I am always honest. We did test on those plastic links,. and they can keep up pretty well over the big pressure,. I mean, they dont break until certain pressure.. and its pretty big one, we are talking TONS.. but they will move and twist and that is something i dont like. as i say, its one time investment for the life of spyder, so i like to do it proper way :)


Excellent video Martin. I have a similar Aussie made bar fitted to my F3 and can vouch for it's effectiveness in the sport position. Haven't tried the touring or comfort setting, that's not my thing but don't doubt it would still be a notable increase over stock. Mine came with a small packet of grease to use on the locating bushes as well. Instructions said plastic links were ok to reuse but I opted for the alloy versions as I could flex the plastic ones which to me defeated the purpose of the bar a bit.:thumbup:

[Martin Slovakia]

Nice!


:) :) :) thank you

[chunkmonk]

WHERE did you get those ramps with the lift plates ??? I so need them NOW!

[DanDanTMM]

WHERE did you get those ramps with the lift plates ??? I so need them NOW!

They look like these...

https://www.amazon.com/Car-Ramp-Lifts-10000lbs-Hydraulic/dp/B09CG9V2QX/ref=asc_df_B09CG9V2QX/?tag=hyprod-20&linkCode=df0&hvadid=532866442045&hvpos=&hvnetw=g&hvrand=16974257666859470128&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9013539&hvtargid=pla-1415239624532&psc=1

[Martin Slovakia]

WHERE did you get those ramps with the lift plates ??? I so need them NOW!

just guys google car ramp with hydraulic lift, and search some shop near to you,.
i have these from Slovakia, some car shop, and they did cost about 100 eur / usd each