Ordered a new “White front Sprocket” but the number is odd!?!

[Don60]

:banghead: I’ll start by giving a list of what was ordered:

Part# 705503291 - Pulley-Idler Kit RT (which does not have new two bearing wheel by the way)
Part# 250001017 - Screw Hex-Flange (new pulley bolt)
Part# 705503239 - Wheel Sprocket 28 teeth B-356 Painted

When I received the parts, the number on the pulley box was correct, 705503239, but the number on the actual sprocket was 705503244 with a date stamped under it of 01/21 and on the opposite side “built in the USA”. I called the dealer back, they are looking into the new number??

I have a couple questions for anyone.....

1. Has anyone else who ordered a new sprocket got one with this number? Is it actually a better one? and

2. I thought BRP parts were manufactured in Canada?

Thanks to anyone who has dealt with this issue!

[BLUEKNIGHT911]

:banghead: I’ll start by giving a list of what was ordered:

Part# 705503291 - Pulley-Idler Kit RT (which does not have new two bearing wheel by the way)
Part# 250001017 - Screw Hex-Flange (new pulley bolt)
Part# 705503239 - Wheel Sprocket 28 teeth B-356 Painted

When I received the parts, the number on the pulley box was correct, 705503239, but the number on the actual sprocket was 705503244 with a date stamped under it of 01/21 and on the opposite side “built in the USA”. I called the dealer back, they are looking into the new number??

I have a couple questions for anyone.....

1. Has anyone else who ordered a new sprocket got one with this number? Is it actually a better one? and

2. I thought BRP parts were manufactured in Canada?

Thanks to anyone who has dealt with this issue!



:dontknow: ..... However " PMK " just reported that he read on face-book that a NEW White pulley had recently failed! :gaah: :gaah: ..... Mike :thumbup:

[Freddy]

See reply 50.

https://www.spyderlovers.com/forums/showthread.php?139643-Another-one-bytes-the-dust-Front-Sprocket-Failure-Red-Dust!/page2

[IdahoMtnSpyder]

I have a couple questions for anyone.....

1. Has anyone else who ordered a new sprocket got one with this number? Is it actually a better one? and

2. I thought BRP parts were manufactured in Canada?
See this thread https://www.spyderlovers.com/forums/showthread.php?137994-2020-21-redesigned-front-drive-sprocket

Like all manufacturers, BRP has parts made all over the world!

[Don60]

I would like to thank Peter Aawen for editing this post. He corrected the layout and now it flows…

[Brush]

:banghead: I’ll start by giving a list of what was ordered:

Part# 705503291 - Pulley-Idler Kit RT (which does not have new two bearing wheel by the way)
Part# 250001017 - Screw Hex-Flange (new pulley bolt)
Part# 705503239 - Wheel Sprocket 28 teeth B-356 Painted

When I received the parts, the number on the pulley box was correct, 705503239, but the number on the actual sprocket was 705503244 with a date stamped under it of 01/21 and on the opposite side “built in the USA”. I called the dealer back, they are looking into the new number??

I have a couple questions for anyone.....

1. Has anyone else who ordered a new sprocket got one with this number? Is it actually a better one? and

2. I thought BRP parts were manufactured in Canada?

Thanks to anyone who has dealt with this issue!
my mate has had 4 sprockets fail first 27000 kl 2nd 31000 3rd 39000 the 4th was a white one just lasted 15000 kl so the problem has not been fixed they are still replacing them after warranty run out so keep riding