Need to Wire 2019 RT to 5-pin flat for Bushtec camper?

[BigGuy66]

I am new to the 2019 RT coming from a 2010 RT. My 2010 was wired by a dealer with a 5-pin flat to match my Bushtec camper. There is a square wiring plug on the RT that I assume is for a Can Am trailer. My Bushtec camper has a 5-pin flat on it. How can I connect the 4-pin square to the 5-pin flat? I am certainly not an electrician. I'm willing to buy what I need if there are adapters and I have a buddy who is knowledgeable about wiring. Just need some instruction. Ryde on...

[IdahoMtnSpyder]

I'll try tomorrow to find the thread with a link to what you need. I have a 5 wire trailer but I made my own harness connecting to a six wire plug.

[scwingman]

Look at this, it is what I used for my Bustec.
Show Chrome Accessories 41-162 Trailer Wire Harness for Spyder
r RT

[IdahoMtnSpyder]

I'm pretty sure that's the one I was thinking of but I couldn't find it on Big Bike parts. Didn't think to look at Show Chrome since BBP and SC are the same company, I think. Then I got busy with other higher priority stuff.

Here's the link:https://www.amazon.com/Show-Chrome-Accessories-41-162-Trailer/dp/B00KYFGTFG/ref=asc_df_B00KYFGTFG/?tag=hyprod-20&linkCode=df0&hvadid=241968617653&hvpos=&hvnetw=g&hvrand=6469783553256750733&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9029587&hvtargid=pla-505119784477&psc=1

It comes with a bare wire end so you can put whatever plug you need on it. The only thing I don't like about it is that it connects right into the taillight connectors rather than the main harness under the seat. Because of that you have to run a separate wire to battery power instead of drawing it from the main harness like the BRP and Spyder Accessories ones do. But it'll work.

[fatboy]

value accessories a sponsor here has that very nice people i put one one last week took about an hour make sure that the fuse holder is accessible i ran it up under the seat

[IdahoMtnSpyder]

value accessories a sponsor here has that very nice people i put one one last week took about an hour make sure that the fuse holder is accessible i ran it up under the seat
I believe Lamonster's Garage also has it.

[motoswami]

I believe Lamonster's Garage also has it.

Lamonster has this:
http://www.lamonstergarage.com/can-am-spyder-trailer-harness-adapter-lamonster/

but it doesn't fill the OP's needs for a 5-pin flat since it's a 4-pin to 4-pin converter

[IdahoMtnSpyder]

Lamonster has this:
http://www.lamonstergarage.com/can-am-spyder-trailer-harness-adapter-lamonster/

but it doesn't fill the OP's needs for a 5-pin flat since it's a 4-pin to 4-pin converter
This is the one I was referring to, but it's shown as out of stock.

http://www.lamonstergarage.com/trailer-harness-can-am-spyder-rt-2010-2019-lamonster/. You have to add the 5 pin connector to it.