Anyone got the Part # for O-Rings on Final Drive drain plug and level screw?

[lebon]

Ok so for the life of me I cannot find which part number or the correct sealing washers (or O-Rings) that are used for the Final Drive drain plug and level screw.

The parts book on-line shows and has the numbers for both Engine Oil drain plugs and also the Gear Box drain and level/fill screw, but for some reason, it does not have anything for the Final Drive! The shop manual talks about replacing the O-Ring/sealing rings so they must have them, yet the parts do not show them?

186730186731186732186733186734

[ButterSmooth]

The better question is to ask for the dimensions of the 'O' ring, so you can buy some from a more reasonable source. Unfortunately, I don't know the answer to either.

[SportsterDoc]

I reused drain plug o-rings, so they are not on this list.
It is possible that I reversed the part numbers for the copper and aluminum crush washers.

The aluminum washers were found later at O'Reillys, for less than $1 each.

186740

Another forum member previously suggested BRP part number 219800486 for the 0-ring

https://www.spyderlovers.com/forums/showthread.php?134954-What-size-is-the-Ryker-s-Final-Drive-Crush-Washer-O-ring-Re-usable

Suggest you purchase from BajaRon
The attached list was before I found his prices for filter/o-ring/washer kits...VERY good deals.

[lebon]

I looked up the part for the 2020 Ryker Rally and they have it listed as an O ring for the final drive drain. For some reason they did not list it in the 2019 schematics/parts list. Can't imagine they would be different though. The part number is indeed 219800486. $10 . Nothing listed for the fill level plug besides the plug itself. 186747186748