Clock Setting

[Spyder2780]

Anyone know how to change the clock setting from 24hr to 12hr settings (24/12)? I can't find it in the manual and its driving me crazy....Thanks

[Donk45]

i cant remember which one it is, but you hold down one of the buttons...M I think and it then goes through the cycle for all the dash stuff...keep cycling through and one of them is 12 or 24.

If you dont see it on the M, then its the other button....sorry im not more helpful, its late and im tired.

[igor]

when u see 24h on display u must push S button.

[Star Cruiser]

when u see 24h on display u must push S button.

Actually as it toggles between 12 and 24 press the "S" button when it is on "12" to set it to twelve hour. Don't forget to pick AM or PM when you set the time when you go to 12 hour mode. (Same - hit the "S" on either AM or PM as desired.

[wildbill6565]

It is in the manual

[BillGargan]

Setting Clock
1. Press MODE (M) button to select clock display.
2. Push and hold MODE (M) button for three seconds.
3. Press MODE (M) button to select 12:00 AM PM or 24:00 time base.
4. If 12:00 AM PM time base is selected, A or P flashes. Press MODE (M) button
to select A (AM) or P (PM).
5. Press SET (S) button to change hours.
6. Press MODE (M) button to switch to minutes (minutes flash).
7. Press SET (S) button to change minutes.
8. Press MODE (M) button

[Spyder2780]

Thanks All....I'll try it out later.