Handle Bar Risers

[scwingman]

Does anyone make handle bar risers for 2015 Spyder RT?

Been looking on the web but didn't have any luck.

I can't be the only one who gets pain in the neck and shoulders when riding on of these machines. Bars are to low and to far away from the rider.

SCWingman

[johnnyrocket]

Have you looked at the tri-ax bars available from BRP? I have a 2015 Rt also and they work good for me. They are pricey but well worth it.

[MONK]

SCWingman---I'm guessing nothing is available. I just bought a Comfort seat to give me a little more leg room but I'm afraid I'll be too far away from the bars. I'm NOT paying about a grand for the Tri-Axis bars plus installation. I sat on a '15 RT-S this weekend. He has the Comfort seat and the Tri-Axis bars. Honestly, I thought his bars were a tad too close for me. Shore wish there were some 2" risers available.

[IdahoMtnSpyder]

Does anyone make handle bar risers for 2015 Spyder RT?
No. Your only option is the Tri-Axis handlebar. It adjusts the grip end of the bar forward and backward several inches and up and down something like 3 or 4 inches. The only real downside is the two halves of the bar pivot at the center so when you swing them back closer to the seat the grip angle changes and your wrists have to bend more.

With the 2020 RTs using the same handlebar as the F3 the market for the Tri-Axis bar will soon dry up so if you keep your eyes open and search regularly you will probably find a good deal on one somewhere. If you're handy you can change them out yourself in a few hours.

[Motorcycledave]

If I were you folks trying to get bar backs or adjustable bars for the RT
I would recommend contacting HELI BARS company.
www.helibars.com they make them for every bike you can think of
maybe if they are hounded enough they will start to make them again
for the CanAm models.
I love mine.
Ride Safe
Dave

[IdahoMtnSpyder]

If I were you folks trying to get bar backs or adjustable bars for the RT
I would recommend contacting HELI BARS company.
www.helibars.com they make them for every bike you can think of
maybe if they are hounded enough they will start to make them again
for the CanAm models.
I love mine.
Ride Safe
Dave
They have them for the F3 and now the 2020 RT. Did they used to make some for the pre-2020 RTs and and RS and GS series?

[Motorcycledave]

They have them for the F3 and now the 2020 RT. Did they used to make some for the pre-2020 RTs and and RS and GS series?

yes I got mine in 2010

[MONK]

yes I got mine in 2010

pics or it didn't happen :)

[krakum1967]

i got mine sitting on my kitchen table. I am going to go ahead and get the Xenon light kit since I have to pull the gauge cluster for the work, might as well only do it once. Thats okay. I also received my LaMonster Hwy Bar Brackets, and the CnC Air Intake and Pre-Filter. I will start on that Saturday when the temps will be in the low 60s.....Then i have the Ergo Peg Extensions for my passenger pegs so my wife will not have to bend the knee so much on my RS-S.

[alchaz]

How about ROX risers from Revzilla?

[MONK]

How about ROX risers from Revzilla?

They won't work for the pre-2020 RTs.