PDA

View Full Version : Spring loaded trunk


Twodog185
07-26-2009, 05:53 PM
Buy a 1/4" or 3/8" spring nut. You can get one at any Lowes, Home Depot, or any wholesale electrical supply house. They cost a buck, maybe.

Blurry pictures, sorry.

http://i288.photobucket.com/albums/ll171/twodog35120/Trunk/springnut.jpg

Next, remove the spring from the cast nut.

http://i288.photobucket.com/albums/ll171/twodog35120/Trunk/springnut2.jpg

Place sprint over latch stem, and seat with ordinary "non hardening" silicone. There is no lateral pressure to move the spring so silicone will hold it just fine.

http://i288.photobucket.com/albums/ll171/twodog35120/Trunk/springnut3.jpg


I'd put this on EBAY, but it'd be like selling money making ideas...a ripoff.
Rando
07-26-2009, 06:09 PM
Or just do this!

This mod works great and only cost me 50 cents! It should have been OEM! It fits perfectly down INSIDE so it's not visible like the other spring mods.
Attached Thumbnailshttp://www.spyderlovers.com/forums/attachment.php?attachmentid=652&stc=1&thumb=1&d=1232330182 (http://www.spyderlovers.com/forums/attachment.php?attachmentid=652&d=1232330182) http://www.spyderlovers.com/forums/attachment.php?attachmentid=653&stc=1&thumb=1&d=1232330195 (http://www.spyderlovers.com/forums/attachment.php?attachmentid=653&d=1232330195)
krb1945
07-26-2009, 08:04 PM
Where did you get that particular shaped spring?

Thanks

"The Ancient Warrior"
Rando
07-26-2009, 08:14 PM
It's a compression spring. I just bent the end to make it look like that. Works great!
the nicko
08-05-2009, 03:36 PM
this works too
Texan
09-17-2009, 11:13 AM
Before anyone says anything, I need to take a picture, but I put a couple of springs on my on either side of the trunk latch. Meant drilling a couple of holes, but it works well. I tried just one and decided to add the second to get it pop open a bit easier.
moroccomole2004
10-05-2009, 11:57 AM
Humm I would love to do this to my trunk. Such a simple idea to solve such an annoying little thing as popping the trunk. I went looking at HD for a spring and could not find one. Anyone point me in the right direction?

:dontknow:

Mole
NancysToy
10-05-2009, 12:02 PM
Humm I would love to do this to my trunk. Such a simple idea to solve such an annoying little thing as popping the trunk. I went looking at HD for a spring and could not find one. Anyone point me in the right direction?

:dontknow:

Mole
ACE Hardware, ACO, or any other good hardware store. They should have a #155 spring in their spring assortment.
bjt
10-05-2009, 06:12 PM
Humm I would love to do this to my trunk. Such a simple idea to solve such an annoying little thing as popping the trunk. I went looking at HD for a spring and could not find one. Anyone point me in the right direction?

:dontknow:

Mole


PM me with your address and I'll send you one. Once you get it and verify it works for you, you can reimburse me for the postage. FYI, the last batch of these I sent out cost about $1.25 to mail.
moroccomole2004
10-05-2009, 07:32 PM
bjt -PM sent!

Thanks!

Mole