Head & Fog Light Install Video on an RT

[Purple Guy]

Here's a quick video on installing Head & Fog lights on an RT.
https://youtu.be/dNd2qmioXkA

[h0gr1der]

Outstanding post, I appreciate it. I'm going to tackle that job in the near future. I like how you edited for time, made it painless to watch. Nice lift too! What brand and how much?

[JayBros]

:agree: Very nice video on an exceptionally good looking RT Ltd!

[Purple Guy]

Here's a little video I did on the lift. :D
https://www.spyderlovers.com/forums/showthread.php?104463-Big-Blue-Motorcycle-Lift-with-RT-Mount

[JimH]

Nice video!

[h0gr1der]

In the process of installing LED Headlights and fog lights. The video made it a simple task, but 2 items I got hung up on I thought I'd bring up. On my 2018 RTL I have the USB and 3.5mm audio jack in the frunk, and the grommet needs to be poked out with a screwdriver before lifting the frunk off. Similarly, if you have installed a battery tender harness into the frunk by going through the rubber plug, it will also have to be disconnected before lifting the funk off. I lifted mine with the wires still attached, and being as it was the first time lift of course I couldn't simply re-hang it. Had to holler for help.

As an aside to all the folks who have replaced the left side driving light cover with the frunk still mounted, I say congratulations! After trying to get the left side cover off and back on with the frunk on the ground I would suggest this; Remove the frunk, it's easier. Follow the video step by step, get a helper, and lift it onto a creeper or roll around mechanic seat. Easier to access, easier to see the yellow positive wire.