Any pics/advice on Loading an F3 onto a trailer?

[JimSter]

Does anyone have any photos etc. of loading an F3 onto a trailer.
How big does the trailer need to be and how do you tie it down after it's loaded?
I know that an Aluma 6310 works just right. But I can't find a place that will rent one.
What's U-Hauls options?

Thanks a bunch, JimSTer

[Mazo EMS2]

You'll need something that is at least 6' between the wheel wells if it has wheel wells. Otherwise, a 6x10 utility trailer will be fine.. The ramp incline angle is key. Ya gotta raise the front of the trailer in some way or form. Or park the trailer so that the tires are in a dip so the back end drops down. Other ideas are long ramps, boards under the ramps etc...whatever you can do to reduce the angle of the ramp

[ARNIE R]

I built these 175246

[ChicagoSpyder]

Here's my F3 on my Aluma trailer, the nose of my F3 does not need the board to clear the ramp with this trailer, I posted this pic last month to show another site member how to make clearance if needed.

NOTE: You only need to lift one wheel to get clearance.