How do I Lift a Ryker Rally?

[campermac]

Has anyone had any experience with lifting their Ryker or Ryker Rally?

I have lifted the front by putting a low profile jack under the front end or the lifted the rear by using a floor jack and a piece of 2x4 under the muffler which is how the shop mechanic showed me, but never lifted both ends at the same time.

[arizona spyder]

Was wondering the same thing, I lifted my Ryker from the front yesterday, using the front tubes, as shown in the owners manual, but like you said, where’s the best place to lift the whole thing, using a motorcycle jack. I’ve used car ramps before on my spyder rt, lifting each wheel and putting a ramp under each wheel, gets it off the ground 8-10 inches, can probably do the same with the Ryker, will follow this post to see what others are doing ��

[KC61]

Not sure why you would want to do this put put jack stands in the front and use a floor jack and 2x4 in the rear. You would never get the balance right to use a motorcycle jack to lift the whole thing.

[TonyS]

Was at Quasar yesterday (the company who make the Big Blue Easyrizer bike lift)
They already had the adapter to lift a Spyder and as you can see, have used my Rally to develop the adapter for the Ryker.

175480

[MDLNB]

There is a Youtube video regarding the lifting the rear and then the front of the Ryker with a jack. I don't have the link for it but it should be easy to find. Basically, there are specific pads under the body to set the jack under. I have lifted the rear in order to remove the tire but I haven't lifted the front yet.

[cptjam]

Was at Quasar yesterday (the company who make the Big Blue Easyrizer bike lift)
They already had the adapter to lift a Spyder and as you can see, have used my Rally to develop the adapter for the Ryker.

175480
Can you share the website? I have a big blue, and would love the bits to make it work on a Ryker!Thanks!
Joe

[TonyS]

They are a UK based company at
https://on-bike.com/

I think their US distributor is
https://lifts-and-stands.com/

They’ve only just done the mounts for the Ryker so I don’t think they are on the website yet.

[TonyS]

Their video is now available:

https://www.youtube.com/watch?v=qqspcNTaWW8

[Grandpot]

I lift my RT by using 3 car ramps. I put one behind each wheel and back up on them. I'm not too sure how that will work on a Ryker due to the sudden engagement of the belt with the resulting jolt. Use your judgement. If it does work, you will now have an additional 8 inches under the bike and it will be very stable.

[Sarge707]

I lift my RT by using 3 car ramps. I put one behind each wheel and back up on them. I'm not too sure how that will work on a Ryker due to the sudden engagement of the belt with the resulting jolt. Use your judgement. If it does work, you will now have an additional 8 inches under the bike and it will be very stable.
Now that's using your head. Yesterday I bought 2 Ramps and drove forward on them and the incline was left right where I want to lay So backing up on them would have the incline in front of the wheels and Not in the way! Great idea!@!!

[Nico75]

Hi tonyS how are you doing with your Rally? We meet at the Saltbox a while ago ( Keith & Doris ) I see you made a visit to Quasar recently and had your Rally up on lift , did you find out price of big blue for Ryker and did you notice if it was lifted anywhere near large exaust cat ? We bought a big blue for our Spyder a couple of years ago , but it was not for the Rs we had ( no fitting for footrest ) we are interested to see price so if possible Tony can you let us know through this forum regards. Keith. Nico 75

[TonyS]

Hi Keith, really enjoying the Rally and been busy fitting various bits (Elka stage 3 front shocks, foot boards, RLS Predator exhaust, Madstad screen, LED headlight bulbs - including wiring in the low beams on the H4’s)
Off on a trip to Kortrijk in Belgium later next week, should be good.
If you’ve still got the Big Blue, looks like new mounts are around £65 which just bolt to the existing arms.
Otherwise I think the price for the full lift (including the mounts) is £395. Can’t see the Ryker specific one on their website, but give them a ring - their number is +44 (0)182761754, ask for Dave.
Tony

[Dragracer]

That's the way I do it. The Ryker doesn't jerk when slowly going forward or backwards. It very easy to get on a set of ramps!


I lift my RT by using 3 car ramps. I put one behind each wheel and back up on them. I'm not too sure how that will work on a Ryker due to the sudden engagement of the belt with the resulting jolt. Use your judgement. If it does work, you will now have an additional 8 inches under the bike and it will be very stable.

[Nico75]

Hi TonyS you have been busy and I hope the parts you put on are satisfactory for you. Thanks for price of BigBlue and enjoy your trip and ride safe. Best regards Keith Nico 75