Fuel Line Coupler

[JerryB]

Hi folks,

Just wondering if any of you can direct me to where I might buy a couple of in-line plastic fuel line couplers; see attached photo.

A local Spyder owner ( '09 RS ) and I want to do the Canisterectomy & will need some.

We could use other designs, this one is just one that was sent to me via email.

Jerry Baumchen170047

PS) JEGS gives me $600 fuel pumps when I search their website. :banghead::banghead::banghead:

[JeffandLori]

https://www.amazon.com/Anderson-Metals-Brass-Fitting-Union/dp/B001PNKDT4/ref=sr_1_16?hvadid=77859208194938&hvbmt=be&hvdev=c&hvqmt=e&keywords=barbed+hose+fitting&qid=1552846373&s=industrial&sr=1-16&tag=mh0b-20

[RICZ]

Ace hardware, Home Depot, Lowe's, etc..

[JerryB]

Hi folks,

Thanks guys; very helpful.

Jerry Baumchen

[Chupaca]

Add me to the Home Depot bunch but sure your local auto parts would also have them on hand....:thumbup:

[Beaudog]

I have found that ACE usually has a better selection of those kind of things. If you have one close I would go there first. Will cost 10 cents more but worth not having to hunt allover town.

[Nobodyjj]

Should be able to get brass ones in hardware/plumbing.

[JerryB]

Hi Nobody,

Re: brass ones in hardware/plumbing.

My local auto parts store has brass ones. I'll try Ace Hardware for the plastic ones.

And thanks again,

Jerry Baumchen

[tibadoe]

Grainger may have what you need: Precision-molded plastic barbed couplings (https://www.grainger.com/category/plumbing/pipe-tubing-and-fittings/tube-fittings/barbed-tube-fittings)