Couple of little mods today

[Lamonster]

We added some mirrors and LED lights today. Both look great on the bike and are easy installs. :doorag:

168621

168622

168623

[ARtraveler]

Very nice. :firstplace: And...hope you are doing better.

[old Timer]

Lamont, how are you doing????

Sending positive Vibes your way.

[Rogue Hawk]

Do you sell those LED lights and mirrors?

[Lamonster]

Do you sell those LED lights and mirrors?

The headlights are in stock, they use the same as the F3 and ST.
http://www.lamonstergarage.com/lamonster-can-am-spyder-f3-h4-led-headlight-for-f3-st-parts-accessories-motorcycle/
We should have the mirrors this week.

[Lamonster]

Lamont, how are you doing????

Sending positive Vibes your way.

I'm doing okay. Better than I was but still not where I would like to be. Thanks for asking

[GrilMiester]

A couple of questions; Will those mirrors clear the factory windshield and how is vibration while driving? On my Ryker Rally, the mirrors are hard to tell anything other than there is an object there, vibration is bad. Also, on the hemet lock, I have been looking into some solutions, but I like the grip guards for blocking some wind in the cold weather, any idea if you can keep the guard with the lock?

[Chupaca]

Nice mods.... Lights do make a difference between the oem and the led...:thumbup:

[Lamonster]

A couple of questions; Will those mirrors clear the factory windshield and how is vibration while driving? On my Ryker Rally, the mirrors are hard to tell anything other than there is an object there, vibration is bad. Also, on the hemet lock, I have been looking into some solutions, but I like the grip guards for blocking some wind in the cold weather, any idea if you can keep the guard with the lock?

The factory shield, bars and mirrors all move together. No problem there.

I just put these on today so I can't tell you about vibration but it has to be better that being on the end of the bars.

Once you have the mirrors changed out the locks will replace the old mirrors. The hand guards still mount in the same place. You might have to do some tweaking to get it how you like it, that I can't say for sure.

[Bob Denman]

168628

That you're back! :yes::clap::2thumbs:

… And the parts look pretty darn cool also... :D

[GrilMiester]

Any thoughts on a back rest with the factory rally seat?

[CTAC]

168633
168634
168635

On the cheap, I just tapped a couple 1/4-20 holes in the aluminum.... took a 2" wide, 10 long, 1/4" thick steel bar and fastened it to a backrest. Simple and effective.

[Bfromla]

168628

That you're back! :yes::clap::2thumbs:

… And the parts look pretty darn cool also... :D

Tinker Therapy :clap:

[Yeochips]

Looks Nice.....Great Idea

[Lamonster]

Here's the install instructions for the LED headlights.
http://www.lamonstergarage.com/ryker-led-headlight-install/

[LeftCoast]

Tinker Therapy :clap:

I know! Must be pretty cool to pull these apart and mock up new ideas. Keeps the brain and hands busy. Hang in there Lamont hope you feel a bit better every day.

[Triumphcycleman]

Lamont,
What about heat with the LED headlights? A lot of the H4 replacement LED's have a built in heat sink out the back due to this concern. I looked at your install picture and I didn't see any. Does your bulb not need it?

[Lamonster]

Lamont,
What about heat with the LED headlights? A lot of the H4 replacement LED's have a built in heat sink out the back due to this concern. I looked at your install picture and I didn't see any. Does your bulb not need it?

There is a heat sink on the bulb.

168724

[Nico75]

Hi mirrors look like off a truck imo nico 75

[Geo333]

Added these upgrades, also. Plus floorboards and throttle control. Great for crusing and relaxing in the upgraded comfort seat. Ride on!