Fire Extinguishers

[effgjamis]

I was in a disussion today and the subject turned to the remote possibility of the spyder catching on fire.
Whereas, I am going to try to make the LA event trip I thought I just might get a fire extinguisher to have for whatever reason.. ( fire I hope not ).

So My question to all you, I am looking for a non-corrosive/caustic, for gas and electrical, I think the BC rated is just that, but I am not sure.

If you all would post the type/model and link I would be greatly appreciative.

Thank you
forrest

[bone crusher]

I don't think it's really necessary...how about getting a 5 gallon drum of, eh, water, and attaching it to the back rack of your bike...attach a tap to it... :D:D

[dltang]

I was in a disussion today and the subject turned to the remote possibility of the spyder catching on fire.
Whereas, I am going to try to make the LA event trip I thought I just might get a fire extinguisher to have for whatever reason.. ( fire I hope not ).

So My question to all you, I am looking for a non-corrosive/caustic, for gas and electrical, I think the BC rated is just that, but I am not sure.

If you all would post the type/model and link I would be greatly appreciative.

Thank you
forrest
Here you go Forrest

ABC Dry Chemical Powder is effective on class A, B, C & Electrical fires and it is ideal for multi-risk fire. Ready for instant use and simple to operate. It is manufactured as per ISO 9002 & BS EN3 Standards. Do not use on fires involving carbon bisulphate and flammable metal. Available in Red and Blue colors. Size capacity of cylinder can be supplied upon request.

It is applicable to the extinguishments of preliminary fire caused by oil, flammable liquid, solid organics, gas and electric equipment. It is the ideal equipment for factory, office, school, hotel, oil pump house, filling station, chemical paint house and combustible places. It is ideal for areas with multiple fire hazards as it is effective on Class A, Class B, Class C and Electrical fires. Dry Powder is electrically non-conductive and is not dangerous to human or animals.

[Lamonster]

I don't think it's really necessary...

http://www.spyderlovers.com/forums/showthread.php?t=10661
Tell this guy that. :yikes:

http://www.spyderlovers.com/forums/attachment.php?attachmentid=1838&d=1241488331
http://www.spyderlovers.com/forums/attachment.php?attachmentid=1840&d=1241488383

[Roaddog2]

http://www.spyderlovers.com/forums/showthread.php?t=10661
Tell this guy that. :yikes:

http://www.spyderlovers.com/forums/attachment.php?attachmentid=1838&d=1241488331
http://www.spyderlovers.com/forums/attachment.php?attachmentid=1840&d=1241488383Actualy he had one in garage just did not know proper use of it wich is common in a panic situation.I think he mentioned did not squeeze handle hard enough to brake seal:dontknow:but definitley did right thing saving himself and House:thumbup::ani29:

[Lamonster]

Actualy he had one in garage just did not know proper use of it wich is common in a panic situation.I think he mentioned did not squeeze handle hard enough to brake seal:dontknow:but definitley did right thing saving himself and House:thumbup::ani29:
I guess my point was Spyders can catch fire. :shocked:

[NancysToy]

Good luck on the non-corrosive aspect. Unlikely to find any small extinguisher that will not be a chemical one, and corrosive. Unless you want to go with a Freon race car type-system, which is big bucks, you will probably have to settle for one with chemicals that can corrode. If you have a fire, and have to stop to try to get the extinguisher out of the trunk, the corrosion will be the least of your worries. BTW, I do recommend an ABC extinguisher, since there are a lot of flammable materials on a Spyder, not just electrical and flammable liquid possibilities.
-Scotty http://www.pmdawnonline.com/forum/images/smilies/velo.gif

[irish2themax]

Regular Dry Chemical (B, C)
A dry chemical agent called sodium bicarbonate. It is non-toxic, non-conductive and non-corrosive. It is easy to cleanup, requiring only vacuuming, sweeping or flushing with water. Extinguishers with sodium bicarbonate are usually used in residential kitchens, laboratories, garages, etc.

Check out boat/marine supply stores...they would need the same type of extinguisher

The Mariner looks like it would do the trick...small enough to put in the trunk and less than $30

Mariner 5, 2lb., 5-B:C Rating, 11" x 4.5" x 3.5" (http://www.westmarine.com/1/1/307-mariner-5-2lb-5-b-c-rating-11-x-4-5-x-3-5-from-kidde.html)

[NancysToy]

Regular Dry Chemical (B, C)
A dry chemical agent called sodium bicarbonate. It is non-toxic, non-conductive and non-corrosive. It is easy to cleanup, requiring only vacuuming, sweeping or flushing with water. Extinguishers with sodium bicarbonate are usually used in residential kitchens, laboratories, garages, etc.

Check out boat/marine supply stores...they would need the same type of extinguisher

That is for a BC extinguisher only. Those won't put out a fire of flammable materials, like plastic or vinyl...or don't we have those things on a Spyder?
-Scotty http://www.pmdawnonline.com/forum/images/smilies/velo.gif

[ataDude]

Here you go. ABC from woot.com... it's 2-fer Tuesday there:

http://woot.com/

http://sale.images.woot.com/XT_Fire_Extinguisher___2_PackqvbStandard.jpg

[irish2themax]

Problem with Class A extinguishers is that they are midly corrosive. Bike needs to be fully hosed down after use. Might be tough in the middle of nowhere. Then again, don't no how "immediate" the clean up needs to be

[Donk45]

thanks, just bought it:ohyea:

[ataDude]

thanks, just bought it:ohyea:

I like Woot. It's my first web visit every morning. Sometimes they have really good stuff... other times, really off-the-wall stuff. :2thumbs:

.

[Donk45]

I like Woot. It's my first web visit every morning. Sometimes they have really good stuff... other times, really off-the-wall stuff. :2thumbs:

.

yep...

[Degaman]

Had already placed an order for 3 two-packs before I noticed this post :thumbup:.

[M2Wild]

I have a small halon one that I carry (same size as the XT above). These extinguishers are for putting out OTHER people's fire. If my bike is on fire, I would not risk a burn trying to get the extinguisher out.

[effgjamis]

My thanks to all for your input... I am going to carry the fire extinguisher in my trailer for the trip. I did check on the halon type, and WOW are they expensive.. I think the ABC type from Woot.com is the way I will go..

Thanks again.

[M2Wild]

Here you go. ABC from woot.com... it's 2-fer Tuesday there:

http://woot.com/

http://sale.images.woot.com/XT_Fire_Extinguisher___2_PackqvbStandard.jpg
You come up with some of the nicest stuff .... and cheap too. I love it. Just ordered a few for my cars.

[Some Guy]

You come up with some of the nicest stuff .... and cheap too. I love it. Just ordered a few for my cars.

:agree: I just ordered two sets myself. Good job ataDUDE! :2thumbs:

[ataDude]

My thanks to all for your input... I am going to carry the fire extinguisher in my trailer for the trip. I did check on the halon type, and WOW are they expensive.. I think the ABC type from Woot.com is the way I will go..

Thanks again.


You come up with some of the nicest stuff .... and cheap too. I love it. Just ordered a few for my cars.


:agree: I just ordered two sets myself. Good job ataDUDE! :2thumbs:

http://smileys.on-my-web.com/repository/Winks/beer-wink.gif
.

Funny how things work. I do carry one in my trunk but was too lazy last night to go see the brand after I read Forrest's post.

I opened up Woot.com this morning and... wah lah.

.

[SPYDERPOPS]

I was discussing the use of a corrosive extinquisher as a problem if you are able to get the fire out before too much damage is done then the result of electrical grimlins thereafter. This is why Halon or Halotron type extinquishers are used in racing.

My take is if the insurance company fixes my bike and it seems to be ok what will happen months down the road as the corrosion kicks in. The cost on the front end may seem high however chasing corrosion problems will be very costly.

I have seen these type of extinguishers for under $125.00 and may go ahead and purchase. My only drawback is where to put the thing where it can be reached in a hurry.

Any ideas?
HC

[M2Wild]

... My only drawback is where to put the thing where it can be reached in a hurry.

Any ideas?
HC


... These extinguishers are for putting out OTHER people's fire. If my bike is on fire, I would not risk a burn trying to get the extinguisher out.

Toasted marshmellows anyone?:lecturef_smilie:

[Rando]

http://www.woot.com/

[Donk45]

:dontknow:
http://www.woot.com/

[bone crusher]

I guess my point was Spyders can catch fire. :shocked:

That fire was in a garage...so, who knows what really happened. The bike is all plastic and plastic melts, for sure...however, the need to carry a fire extinguisher is very low down on my list. If my bike is on fire, I think I'll probably have other problems...yikes!

[bone crusher]

My thanks to all for your input... I am going to carry the fire extinguisher in my trailer for the trip. I did check on the halon type, and WOW are they expensive.. I think the ABC type from Woot.com is the way I will go..

Thanks again.

You have a trailer to put it in...that makes more sense than on/in the bike itself...

The odds that you'll ever have to use it are slim to none...this is a good thing!

[effgjamis]

I was discussing the use of a corrosive extinquisher as a problem if you are able to get the fire out before too much damage is done then the result of electrical grimlins thereafter. This is why Halon or Halotron type extinquishers are used in racing.

My take is if the insurance company fixes my bike and it seems to be ok what will happen months down the road as the corrosion kicks in. The cost on the front end may seem high however chasing corrosion problems will be very costly.

I have seen these type of extinguishers for under $125.00 and may go ahead and purchase. My only drawback is where to put the thing where it can be reached in a hurry.

Any ideas?
HC

The cheapest I found was a 1.25 lb for $95.
If you have a trailer hitch I suppose you could mount it there for quick access.. Trunk,, no way, could be too hot. Another possibility would be under the hand rails the passenger would hold on to.. Sooo.. Unless we could get real fancy and mount several under the plastic with a remote or sensor switch we just have to live with it or not.

[daddydarko]

Thought of this post when I saw this link. (http://www.topspeed.com/motorcycles/index162.html)

http://pictures.topspeed.com/IMG/crop/200906/bmw-r1200rt-by-firee-1_460x0w.jpg

[bone crusher]

http://www.k2motor.com/fe-01s.html

[NancysToy]

http://www.k2motor.com/fe-01s.html
Not ABC, won't work on flammable materials, only electrical and flammable liquids.
-Scotty http://www.pmdawnonline.com/forum/images/smilies/velo.gif

[M2Wild]

http://www.k2motor.com/fe-01s.html

Too bulky to keep on the Spyder.