Help

[Fire34]

Everyone
Just got my dash mount today and went to install it. Removed the first dash bolt no problem, went to remove the second could not get a hold of it and when i did the darn thing squirted out and into the windshield arm. That is what i suspect anyway as I could not find it on the floor. I am afraid to start the bike up and maybe rattle it loose. I have yet to take the tupperware off for my first oil change etc. Any ideas? Thanks Guys

Dave

[bmccaffrey]

Many of us have lost bolts. If it's small move on it will either fall out or wedge. Not much it can hurt

[MR. H1956]

It may shake out one day when you least expect it. Or it may never come out. At least its still part of the bike. I've loss 3 or 4 that disappeared into the dark obiss. Never to be seen again. No worries. Happy Trails

[Joel The Biker]

Been there... Use a magnet. I use a telescoping magnet. Stick in hole and move it around a hopefully you will get lucky. I also use a camera probe sometimes. You can get them at harbor freight or walmart.

[canamjhb]

Welcome to the world of lost bolts/screws. We are a very large fraternity. (Not to worry)

[Fire34]

;) For a while thought we werent going to be able to ride thanks again guys
Dave

[imfleck]

I always seem to have a bolt or two "left over" when I put my Spyder back together. So, if you ever need a bolt I'm sure I've got one that'll fit, haha.

[Fire34]

any of those to worry about in that area ?
Dave

[jerpinoy]

Worry less and it's not like a airplane that will cause not safe for flight item. Just ensure it will not jam on your steering system. Happy riding.