Exhaust help :)

[erikbt]

Hi ;)

today the road-police took my number plate :(

the exhaust i got on was modified, and the previous owner had removed the DP killer and everything inside the exhaust, So it was LOUD! :sour:

i need to put in a original stock exhaust, and from the dealer here in Norway it will cost my 1000 dollars for a new one.

i found this on the internet, can anyone tell me if this is original stock exhaust?

https://www.ebay.com/itm/Can-Am-Spyder-OEM-Sport-Exhaust-Stainless-amp-Black-Silencer-Muffler-FREE-SHIP-/202094368155?vxp=mtr#shpCntId

or

https://www.boonstraparts.com/en/part/can-am-spyder-rs-990-se5-2009-2010-exhaust-muffler-original-oem-2010&ID=B10000C0K2


i got a Spyder RS SE5 2009

155099155100

[asp125]

Both look like OEM, provided the previous owner hasn't drilled out the insides.

[BLUEKNIGHT911]

:agree: ... They both look stock OEM ..... The issue for you is going to be the shipping .... The one that says free shipping , I doubt includes Norway ........... IMHO, I would take what's salvageable from the one you have and have a welder make you one using a quiet small car muffler ......... the part that attaches to the engine would be hard to duplicate, the muffler part would be simple .....good luck .... Mike :thumbup:

[SPYD3R]

that looks like one of mine that i altered....
here's 2 versions of altered RS mufflers...
155101 155102 155103 155104 155105
and i agree.... WAAAAAAAAAAAAAAAAAAY TOO LOUD.....
Dan P
SPYD3R

[Chupaca]

I just sent my oem exhaust to Canada from San Diego....box size..36"x14"x13" 23.15lbs... cost was 118.61 us . You might check over your way for someone with a oem or find a better deal here where everyone changes the exhaust. I gave mine to a member here he just paid the shipping....:thumbup:

[bmccaffrey]

Too bad i have a one for 13 and newer i would have give u pay shipping . Different though with the bend

[UtahPete]

:agree: ... They both look stock OEM ..... The issue for you is going to be the shipping .... The one that says free shipping , I doubt includes Norway ........... IMHO, I would take what's salvageable from the one you have and have a welder make you one using a quiet small car muffler ......... the part that attaches to the engine would be hard to duplicate, the muffler part would be simple .....good luck .... Mike :thumbup:

Great idea, Mike.

[Dutch Spyder]

I found one here in the Netherlands (not so far from Norway).
https://link.marktplaats.nl/m1219129268

[erikbt]

I found one here in the Netherlands (not so far from Norway).
https://link.marktplaats.nl/m1219129268


Thank you mate!

I bought just one from this site : https://www.boonstraparts.com That is also in Netherland.
so hope it's the right type.. cost me 260 euros so it became a bit more expensive.If it does not fit, I'll try the one you sent me a link for.


https://www.totalparts.nl/picture/boonstra/000000057266-1.jpg

[Clary]

Thank you mate!

I bought just one from this site : https://www.boonstraparts.com That is also in Netherland.
so hope it's the right type.. cost me 260 euros so it became a bit more expensive.If it does not fit, I'll try the one you sent me a link for.


https://www.totalparts.nl/picture/boonstra/000000057266-1.jpg
Yes this one will fit your RSS.i found this one quite loud and chupaca send me his stock muffler which I now installed on my bike. Thanks chupaca.