Shifting, semi-automatic

[TEHelms]

I just did an oil change for the year on my 2010 RT with the semi-automatic. Changed both the oil filter and the transmission filter, started it up and have no leaks. I let it warm up, put it in reverse, backed out of the drive and shifted into 1st. Went through 1st and 2nd but when I tried to shift out of 3rd, no shift. I slowed, it shifted back down and again I went up to 3rd but it wouldn't shift into 4th. First time I've ever had this happen.

So, before I take it to the dealer, I'd like to know if anyone has had the problem or knows of a solution. It's thrown no codes, by the way. I have a little over 20,000 miles on it.

Thanks.

[Slowpoke387]

Might want to check that trans filter. Our brand new machine was shipped with a damaged trans filter and it caused all kinds of shifting issues.
Just a thought, especially if it wasn't doing this before.

[JayBros]

You said you let the engine warm up but you did not say if you checked the oil level when it was warm. Apologies, but that's the only thing I know to suggest checking on a '10.

[billybovine]

Check oil level first.

[Bob Denman]

:agree: If the oil level isn't right: nothing works properly... nojoke

[Crisis]

Also,
Technically you need to drive it before you check the oil to get the proper oil level reading.
Good luck.

[Peter Aawen]

^ True that! ;)

And don't forget that the computer won't let you shift UP on an SE if you don't have the road speed & revs to pull that gear; just like it won't let you shift down if you are going too fast or revving too hard.... :lecturef_smilie:

So how fast were you going & what were your revs at when you tried to shift into 4th?

[TEHelms]

In typical Spyder fashion, I started it up this morning, took a ride and it shifted perfectly! We all know that sometimes "they" do that.

Thanks for all the input! Really appreciate it.

[Bob Denman]

:congrats: For being "Back on Three!" :clap: :riding:

[Ron2andia]

:thumbup::thumbup: