LED Signal lights

[fetermel]

I added saddle bags with LED light's in them and now my signal lights blink faster, wonder if there is anything you can add to the wiring to get them back to normal. 2013 STS is the model I have.

[Bob Denman]

Whose lights did you add? :dontknow:
If I were you: I'd contact the folks at TricLEDs, and ask them about the solution to this. I believe that it involves adding a resistor to your modifications...
Good Luck! :thumbup:

[pwilbarger]

This probably won't work on yours but you could try it. If not you'll prolly have to add a resistor.
https://youtu.be/gpuEqpiTm4M


Sent from my iPad using Tapatalk

[bondo]

I had a he same trouble led light in bag replaced tail lights with led tail lights from custom dynamics problem solved

[bondo]

I had a he same trouble led light in bag replaced tail lights with led tail lights from custom dynamics problem solved you can try resetting hyper flash on lamonster sight

[Bensonoid]

I put led's on my mirrors and had to add a 100 ohm 1/2 watt resistor but only on the left side.

[Haze]

I put led's on my mirrors and had to add a 100 ohm 1/2 watt resistor but only on the left side.

How did you add the resistor. In series or parallel with the leds??
I have an erratic blinking on the left side only of my STS.

[Bensonoid]

In series. I started with 100 ohm and that was enough to fix mine.

[fetermel]

I tried Lamonster's trick on my STS and that did not work.:banghead::banghead:

[Bob Denman]

If it's the trick that I'm thinking about: (The hazard-flasher one...); that's only for 2014 and later bikes.

[Marker]

Need to reset flashers
Fpound post on how to reset hyper flash
my 2016 F3T had the problem when Lamonster garage installed the halo flashers on my fog lights. Lamont reset flashers now works ok.

http://www.spyderlovers.com/forums/showthread.php?84285-Reset-Hyperflashing-instructions&highlight=hyper+flash

[Bob Denman]

His bike is a 2013, and this procedure won't work... :banghead: