Kraddle Lock For GPS

[spydertrike]

Which vendor sells the Kraddle Lock for the GPS on the Spyder ?

Thank you

[KJWEB]

I don't believe the owner of the Kradellock sells his product other than his own site. I have one and it's definitely worth having. Make sure you tell him its for the Can Am Spyder and he will include the longer bolts.

Kradellock (http://www.kradellock.com/)

[rmag]

I don't believe the owner of the Kradellock sells his product other than his own site. I have one and it's definitely worth having. Make sure you tell him its for the Can Am Spyder and he will include the longer bolts.

Kradellock (http://www.kradellock.com/)


:agree::agree::agree:

[Bob Denman]

Please make that a "+2"... :agree::agree::agree:

[Bfromla]

http://kradellock.com
Hopefully he will become a vendor. :)

[HayRog]

http://kradellock.com
Hopefully he will become a vendor. :)


I'm wondering if enough peeps asked him at -- info@kradellock.com -- he might consider it :)

[Bob Denman]

:DIt never hurts to ask... :thumbup:

[oldguyinTX]

:DIt never hurts to ask... :thumbup:

Bob, you have one, do you not? A short comment on installation (any special tools, modifications, etc) and its use would be helpful to those of us who are considering purchasing one.

[Bob Denman]

I have the Kradellock, and the Kamlock***... :D
The installation of both, was really easy; but the online instructions were MUCH clearet, than the ones supplied with the product...



*** I use this one, when I have my Go-Pro hooked to the bike. :thumbup:

[SpyderSteveFL]

Bob, you have one, do you not? A short comment on installation (any special tools, modifications, etc) and its use would be helpful to those of us who are considering purchasing one.http://www.spyderlovers.com/forums/showthread.php?91562-install-a-krendlelock-on-a-rt-limited&p=1108795&viewfull=1#post1108795

[Questions]

http://www.spyderlovers.com/forums/showthread.php?91562-install-a-krendlelock-on-a-rt-limited&p=1108795&viewfull=1#post1108795

Great instructions! :2thumbs: I have just ordered one of these. I want to do some touring next year, and at some point I'd be sure to forget to take the Zumo off the bike when stopped...:gaah:

[ravseren]

I suggested he get involved a year or two ago, but I didn't get any response.
As far as installation goes, it is a "no brainer", just replace the exisint screws with the new ones and done pretty much. No special tools or anything.

[Bfromla]

I'm wondering if enough peeps asked him at -- info@kradellock.com -- he might consider it :)
I did my part & made formal request:thumbup:, has to filter thru the sales dept email :p
But it's done.

[JayBros]

If you can change a light bulb you can install a Kradellock.

[Bob Denman]

:agree: remove four bolts, slide it into place, and replace with four longer bolts... :thumbup:

[fastfraser]

Does it attach to the BRP mount ?

[Bob Denman]

Yes; it does. It actually just slips between the BRP mount, and the brackets that hold everything to the mounting points. :thumbup:

[HayRog]

I did my part & made formal request:thumbup:, has to filter thru the sales dept email :p
But it's done.

I e-mailed him yesterday.Lets hope there's a positive response.