PDA

View Full Version : Broken anntenna



dave92253
12-07-2016, 05:54 PM
2014RT
Taking cover off mama's RT and broke the right side anntenna. Best place $$$ to order a new one? How do I put it on? Thanks in advance
dave

Bob Denman
12-07-2016, 06:12 PM
Wal-Mart sells one for about ten bucks. Most folks that have them, seem to like them. :thumbup:

cptjam
12-07-2016, 06:24 PM
Call Harvey. He has a nice antenna.
If it broke off close enough, use a socket to remove the base. Thread on the new one with a drop of blue locktite. Replace the rubber cover.
If it broke a bit high for the socket, clip it off short, then remove.
If you get in trouble, call. Joe

Deanna777
12-07-2016, 06:59 PM
2014RT
Taking cover off mama's RT and broke the right side anntenna. Best place $$$ to order a new one? How do I put it on? Thanks in advance
daveDave, I also have a 2014RTS-SE6, and replaced my long antenna ( I broke mine, putting on my 1/2 cover)and replaced it with a short antenna( part # 710005084) I bought mine from Pitbull ( Springfield, MO) and I got 2 extra base antenna boots( part # 708300156).

Use a 7 mm deep socket wrench. Here is a picture of short antenna on my 2014RTS-SE6:141092 141093 141094




Sorry I did not take any pictures before I put the new short antenna on. I like the antenna, radio stations are clear. Deanna

ArachnidRyder
12-07-2016, 07:03 PM
If you mean the AM/FM radio antenna, I will second the Walmart recommendation. Cheap and has worked great since installation a couple years ago.


Sent from my iPhone using Tapatalk

PW2013STL
12-07-2016, 07:23 PM
Call Harvey. He has a nice antenna.
If it broke off close enough, use a socket to remove the base. Thread on the new one with a drop of blue locktite. Replace the rubber cover.
If it broke a bit high for the socket, clip it off short, then remove.
If you get in trouble, call. Joe

Joe WHO? :roflblack::roflblack:

PW2013STL
12-07-2016, 07:25 PM
I replaced mine with the short one from Spyder Pops ( Harvey) it's much nicer than the stock one and a lot cheaper too.

safecracker
12-07-2016, 08:38 PM
I have a Walmart shorty. Works as good as the original.

Cruzr Joe
12-07-2016, 08:59 PM
Another vote for the one from Spyderpops, it comes with the nicer looking boot also

Cruzr Joe

lou49
12-07-2016, 09:20 PM
Call Harvey. He has a nice antenna.
If it broke off close enough, use a socket to remove the base. Thread on the new one with a drop of blue locktite. Replace the rubber cover.
If it broke a bit high for the socket, clip it off short, then remove.
If you get in trouble, call. Joe 7 mm socket that is!

lou49
12-07-2016, 09:27 PM
I didn't brake mine, but replace that big old whip with this one from autozone for about $11

Cruising RT
12-07-2016, 10:55 PM
I bought a antenna from Spyderpops. Wanted to go shorter so that placing cover on would be easier. I can't seem to be able to get the factory antenna off. Obviously there isn't wrong with original antenna so I don't want to bring antenna off just so I can use a socket for more leverage so anyone have a suggestion on how to get old one off. :popcorn:

cptjam
12-07-2016, 11:51 PM
7mm deep socket, turn with vice grips. Off.

Marker
12-08-2016, 01:01 AM
the $10.00 walmart short rubber antenna works far better than the stock antenna and the cost cannot be beat.
i was surprised how great this antenna works

rmag
12-08-2016, 09:15 AM
I bought a antenna from Spyderpops. Wanted to go shorter so that placing cover on would be easier. I can't seem to be able to get the factory antenna off. Obviously there isn't wrong with original antenna so I don't want to bring antenna off just so I can use a socket for more leverage so anyone have a suggestion on how to get old one off. :popcorn:

I also replaced mine with Spyderpop's. Works great. Since my original was not broken off, I used a 7mm ignition wrench instead.
Of a socket.

Good luck.

Buggy
01-02-2017, 04:16 PM
I drilled out the base and epoxied the antenna back in....works fine. Less than 1/2 inch shorter. Did not want to replace with a shorter one because I have a tall cb antenna on the other side. Need to match don't you know:)

KosherKid
01-02-2017, 07:06 PM
I want to replace the antenna on a 2016 RT. It looks like the 7mm socket wont work since the base is different than on my 2011 model.

Do I just grab the rubber base with pliers and twist??

Thanks for the assist.

krafael5
01-02-2017, 07:21 PM
Wal-Mart baby!!

krafael5
01-02-2017, 07:22 PM
P.S. Get some thread lock also.