BRICa makes a cupholder for a stroller. Its about $12 and cllamps to the rear hand grips or I have mine clamped to the rear edge of the dash top.
2015 an Am Spyder RT Limited
2013 Yamaha WR250R - Sold
2011 Can Am Spyder RT-S SE5 Limited - Sold
2011 Aspen Sentry Trailer
2003 BMW K1200LT - Sold
2007 Unigo Trailer - Sold
2001 BMW K1200LT - Sold
2001 Honda 750 NightHawk - sold
2015 RT Ltd , Canamspyderaccessories Brake pedal ext. Red
Anyone find a reasonable cup holder for the RT Limited?
This is an ISC cupholder mounted with a 1" RAM ball to one of the 11mm bolts in the center of the Spyder. Turn out the stock bolt and replace with on that is 3/4" longer and a spacer. You can swivel it back on the driver side of the bars or forward away from the driver.
Either way works great!
Penny and Rick have owned many motorcycles starting in 1974 with Hondas, then to Suzukis, Gold Wings and ultimately Spyders.
74 Honda 360T (pair); 78 Suzuki GS 1000 (pair); 82 Honda Aspencade; 84 Honda 400; 87 Yamaha 1100; 99 Honda Valkyrie; 01 Suzuki Burgman(triked); 02 Honda GL 1800(triked); 10 Spyder RTSE; 11 Spyder RTSM; 12 Spyder RTSL (pair); 20 Spyder RTL (current)
Anyone find a reasonable cup holder for the RT Limited?
Type in the title of my message and it will lead to the link where I got my cup holder, the vendor is Air wing guy, he makes custom products for a variety of bikes, mine cost $55.75, it looks great.
I tried the Brica cupholder. I didnt' like it on the bike so put it on the boat. I now use the cupholder from Diamond R. It works really well and I'm happy with that one. They are a sponsor on this site also and great people to work with.
I had an old cupholder from Barefoot Willie. I found a plastic pipe clamp at Menards for a couple of bucks and attached the cup holder to the clamp. It works well for me.
Does anybody actually try to pull their drink out of one of these holdes and take a swig with at speed?
(I keep the drinks in the top trunk; that's what fuel stops are used for! )
Does anybody actually try to pull their drink out of one of these holdes and take a swig with at speed?
(I keep the drinks in the top trunk; that's what fuel stops are used for! )
When it's 110 in the shade and I'm trapped in bumper to bumper traffic in Atlanta, I welcome the cup holder and its contents.
Penny and Rick have owned many motorcycles starting in 1974 with Hondas, then to Suzukis, Gold Wings and ultimately Spyders.
74 Honda 360T (pair); 78 Suzuki GS 1000 (pair); 82 Honda Aspencade; 84 Honda 400; 87 Yamaha 1100; 99 Honda Valkyrie; 01 Suzuki Burgman(triked); 02 Honda GL 1800(triked); 10 Spyder RTSE; 11 Spyder RTSM; 12 Spyder RTSL (pair); 20 Spyder RTL (current)
I never use a full hat - and have a cup holder attached to a RAM mount, attached to the back of my GPS mount. I always have coffee in the morning, and ice water the rest of the day (hot water, if it's cold). I use a plastic straw from an old Butler cup, which I insert into my Starbucks travel mug.
I have a friend with the same system, except he never puts hot liquids in his cup, so he has a plastic cup with a lid and straw.
Both work well at freeway speeds. Drinking while on the twisties does not work well ..
2014 RT SE6 Rider
X - Honda Rider
X - RT S driver
X - RS driver
Lifetime VFW Member
Anyone find a reasonable cup holder for the RT Limited?
This is the best I have found and it provides a perfect place to attach ram balls for anything you want to mount. I have the butler cup holder on one side and an iPhone holder on the other. Yes, they can fit one on the right side also.Ram Ball Right.jpgRam Ball Overhead.jpg
Anyone find a reasonable cup holder for the RT Limited?
Today I installed the Butler cup holder.Its for sale on this web. They have them From 99.00. I bought the B model that was a little more.
took my cup for a test run and it passed the test.
Current: 2018 F3 Limited
Previous: 2011 RT with 622 Trailer
Mods:
F4 Customs 25" Windshield
F4 Customs Air Wings
Spyderpops Top Case/Seat Extender
TackForm Phone Mount
Lamonster Ram Ball Handlebar Mount
Show Chrome Passenger Armrests