2017 Daytona Codes

[Roadster Renovations]

Getting a limp home mode occasionally after the cruise control assy was replaced by the dealer. The codes I am getting are:

B100F
C0040

Any thoughts?

[youngers]

I have copied a folder of codes off the lamonster , and there isn`t an B100f in his list , so if this is close too every one translation in codes ( from one manufacture of components , too another , ) I see u0100 which is TCM ( probably not tuner classic movies ) but is Bosch number , and they state " lost communication with ECM ( lost can ID`S ) ---- cause module internal error , damaged circuit wires or damaged module pins .... now take it this is just one so far will keep looking

[youngers]

doc , this was just codes for the ECM module , so it wasn`t a good place too look for codes I suppose , still looking for you

[Doug]

Getting a limp home mode occasionally after the cruise control assy was replaced by the dealer. The codes I am getting are:

B100F
C0040

Any thoughts?

C0040 is the VCM Module, had to replace mine on my daytona.

[youngers]

haven`t found the B100f , the app isn`t giving any help

[youngers]

I did a reply only to get this thread too the top again , the B100f is an unusual code I got admit , ( is this the correct code .... ) maybe the B isn`t a B just looking for a clue thanks to folks checking this out for the fellow rider

[Roadster Renovations]

41890303_10161376867045455_9085748794926039040_n.jpg

42044361_10161376867175455_8595501470911037440_n.jpg

42141786_10161376866880455_18636881004593152_n.jpg

I guess there were three codes: Also add C006C

[Ex-Rocket]

C0040 VCM Brake pedal switch failure

COO6C ECM VSS CAN rate message error

B1OOF Can not find any information on that code

[Chupaca]

I heard that there are some new codes and a new BUDS need to dig deeper and if the dealer doesn't have the program

[Roadster Renovations]

Tech at the dealership pinched the harness installing it. Not cool. Going to ask for gas reimbursement.