-
F4 windshield for F3-S
I have a F4, 28" tinted windshield off my 2015 F3-S that I sold. It has some scratches on the cross bar from where I mounted a windshield bag.
I also drilled a hole in one of the side brackets to mount a GPS. The screen has a couple of small scratches around the mounting holes that I did while mounting.
I had it mounted about 3 months.
I paid $561.00 for it and would like $350.00 plus shipping.
Price reduced to $350.00
I will send pics if you text me.
Thank You
Bill
317 696 2822
Last edited by IndyBill; 05-14-2017 at 07:52 PM.
Reason: wrong size given
-
Bump for price change. $350.00
-
Very Active Member
WackyDan - Fun, not crazy.
Charlotte (Matthews), NC
Silver Moon SM5 - V35 and V46 Givis, CHAD, Motolight 35w steering lights, Dash Powerlets, Helibar risers, Garage door opener, Eastern Beaver PC-8, Digital voltmeter, Kewl Metal Intake, Evoluzione Sway Bar, RT Shocks and Juice Box PRO.
*Mower deck in development*
2008 model -new in crate, April 09
26,000 miles.
Looking for other Charlotte area riders to cruise with and compare Spyders.
HAPPY SPYDER OWNER
-
Sorry I did not include this. It is tinted. I did not use it very long because I sold the bike.
Text me a number and I can send you pics.
Thank You
Bill
-
Very Active Member
Originally Posted by IndyBill
Sorry I did not include this. It is tinted. I did not use it very long because I sold the bike.
Text me a number and I can send you pics.
Thank You
Bill
.
I believe you. Not sure I can swing the $350 and I was hoping for clear.
Full disclosure... I already have a F4 shield in 32". Was going at this with two different angles...
1. Want a 28" in tint as I think my 32 is overkill.
2. Want a 28" in clear to cut the top off off and use on the MRA X-Creen mounts as a custom (and better) spoiler.
Given that, I might not be your customer. Let me know if you are still sitting on it in a week or so and we'll see if we can strike a deal. From time to time F4 sells Blemished shields and I'll have to check on their prices to see if one through them is better than through the forums.
WackyDan - Fun, not crazy.
Charlotte (Matthews), NC
Silver Moon SM5 - V35 and V46 Givis, CHAD, Motolight 35w steering lights, Dash Powerlets, Helibar risers, Garage door opener, Eastern Beaver PC-8, Digital voltmeter, Kewl Metal Intake, Evoluzione Sway Bar, RT Shocks and Juice Box PRO.
*Mower deck in development*
2008 model -new in crate, April 09
26,000 miles.
Looking for other Charlotte area riders to cruise with and compare Spyders.
HAPPY SPYDER OWNER
-
Originally Posted by WackyDan
.
I believe you. Not sure I can swing the $350 and I was hoping for clear.
Full disclosure... I already have a F4 shield in 32". Was going at this with two different angles...
1. Want a 28" in tint as I think my 32 is overkill.
2. Want a 28" in clear to cut the top off off and use on the MRA X-Creen mounts as a custom (and better) spoiler.
Given that, I might not be your customer. Let me know if you are still sitting on it in a week or so and we'll see if we can strike a deal. From time to time F4 sells Blemished shields and I'll have to check on their prices to see if one through them is better than through the forums.
I was just in his neck of the woods and no deals accepted. Hers a possibility. I want a 32 clear and I need hardware. Maybe there's a deal to be reached. I'll buy his brackets, you buy his tinted 28 and you give me a deal on your 32 cleared shield. All are happy.
-
Hello Dan and Leon,
I can split it up for sure. If I can end up with $340.00 I would be happy.
Let me know if you guys can work something out.
Thank You
Bill
-
Very Active Member
Problem is I'll likely keep my clear. One way or another I'm going to probably end up with a partially cut F4 shield to use a spoiler.
Looks like I'm either going to buy my own piece of Hard treated Poly and do some at home heating and bending or will buy a blemished shield from F4 for $125.
So while that deal would work normally in my case I am engineering a solution to a problem and may still need my 32.
WackyDan - Fun, not crazy.
Charlotte (Matthews), NC
Silver Moon SM5 - V35 and V46 Givis, CHAD, Motolight 35w steering lights, Dash Powerlets, Helibar risers, Garage door opener, Eastern Beaver PC-8, Digital voltmeter, Kewl Metal Intake, Evoluzione Sway Bar, RT Shocks and Juice Box PRO.
*Mower deck in development*
2008 model -new in crate, April 09
26,000 miles.
Looking for other Charlotte area riders to cruise with and compare Spyders.
HAPPY SPYDER OWNER
-
Originally Posted by WackyDan
Problem is I'll likely keep my clear. One way or another I'm going to probably end up with a partially cut F4 shield to use a spoiler.
Looks like I'm either going to buy my own piece of Hard treated Poly and do some at home heating and bending or will buy a blemished shield from F4 for $125.
So while that deal would work normally in my case I am engineering a solution to a problem and may still need my 32.
Contact f4, they will custom cut you a shield for your bracket. Be a shame if for some reason you messed up cutting the 32
-
Very Active Member
Originally Posted by leonml
Contact f4, they will custom cut you a shield for your bracket. Be a shame if for some reason you messed up cutting the 32
Already talked with them.
WackyDan - Fun, not crazy.
Charlotte (Matthews), NC
Silver Moon SM5 - V35 and V46 Givis, CHAD, Motolight 35w steering lights, Dash Powerlets, Helibar risers, Garage door opener, Eastern Beaver PC-8, Digital voltmeter, Kewl Metal Intake, Evoluzione Sway Bar, RT Shocks and Juice Box PRO.
*Mower deck in development*
2008 model -new in crate, April 09
26,000 miles.
Looking for other Charlotte area riders to cruise with and compare Spyders.
HAPPY SPYDER OWNER
-
Originally Posted by WackyDan
Already talked with them.
Aaaaaaand?????
What'd they want?
-
Very Active Member
Originally Posted by leonml
Aaaaaaand?????
What'd they want?
They won't make a mini. They will sell me a blemish when one comes available.
WackyDan - Fun, not crazy.
Charlotte (Matthews), NC
Silver Moon SM5 - V35 and V46 Givis, CHAD, Motolight 35w steering lights, Dash Powerlets, Helibar risers, Garage door opener, Eastern Beaver PC-8, Digital voltmeter, Kewl Metal Intake, Evoluzione Sway Bar, RT Shocks and Juice Box PRO.
*Mower deck in development*
2008 model -new in crate, April 09
26,000 miles.
Looking for other Charlotte area riders to cruise with and compare Spyders.
HAPPY SPYDER OWNER
-
Originally Posted by WackyDan
They won't make a mini. They will sell me a blemish when one comes available.
So you still want to keep the 32 then?
-
Very Active Member
Originally Posted by leonml
So you still want to keep the 32 then?
Yep.
WackyDan - Fun, not crazy.
Charlotte (Matthews), NC
Silver Moon SM5 - V35 and V46 Givis, CHAD, Motolight 35w steering lights, Dash Powerlets, Helibar risers, Garage door opener, Eastern Beaver PC-8, Digital voltmeter, Kewl Metal Intake, Evoluzione Sway Bar, RT Shocks and Juice Box PRO.
*Mower deck in development*
2008 model -new in crate, April 09
26,000 miles.
Looking for other Charlotte area riders to cruise with and compare Spyders.
HAPPY SPYDER OWNER
-
Well bill, I tried. With shipping to wi now just puts this deal beyond a deal for a drilled scratched bracket and windshield. Shipping may be near 50 dollars.
-
That's fine,
The scratches on the shield are hardly visible and just around the mounting holes. I understand you not wanting to pay a fair price but please do not knock piece.
Thank you
Bill
-
Originally Posted by IndyBill
That's fine,
The scratches on the shield are hardly visible and just around the mounting holes. I understand you not wanting to pay a fair price but please do not knock piece.
Thank you
Bill
Wasn't. I was just stating it's not like new. Sure it's acceptable to someone at that price. Fair is what someone is willing to pay. Do you praise what you want to buy and get a good deal in the end? I'm trying to get a price that I can't say no to.
Last edited by leonml; 05-31-2017 at 12:08 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|