Hi, just traded my Sportster and some cash for a 2009 Spyder GS. Had the wife on a ride and she wants a backrest. I have searched but only came up with the Smoothspyder model which looks great but at close to 500 bucks is a bit steep - any other suggestions? A suitable gently used backrest would do also. I will be getting the Rivco risers set which many forum members like and am looking into the BajaRon swaybar. I am no gearhead but was able to do my own basic maintenance on the Sportster so I think I should be able to handle the installation on these accessories. Any advice would be appreciated (I am not missing the Sportster!).
Check the sponsors of this page. Corbin, Ultimate have back rests cheaper than Can Am. Just make sure u get the right back for your year and model.
And if u get non Can Am, u may have to do some cutting so they fit.
‘Congrats and good luck.
2018 RT Limited Metalic Champagne US Spyder Ryders Long Island NY Chapter
I have the ‘08 gs and just put
on the rivco handle bar risers today. Watch out how they have the oarts labled. I installed what they labled as the left side, after i un wrapped what was labled as the rigjt side.. i had to take completly apart the left side again and put
on the correct riser. Sucked cause the reverse cable is a bish. It came with the backrest wind shield and air delectors already.
Thanks for all the input, I will heed the advice given. Should anyone have any additional suggestions for a suitable 2009 GS passenger backrest please let me know.
Thanks for all the input, I will heed the advice given. Should anyone have any additional suggestions for a suitable 2009 GS passenger backrest please let me know.