Questions regarding trailer hitch & module for 2015 RTS

[JayD]

I just purchased a used trailer and now I have to findtrailer hitch & module. The trailer which is an Aluma Motorcycle trailer, 2004 year model and has a 4 prong plug, I believe he said. I don't have the trailer in my procession as yet or I would try to describe it. Which is best, BRP, Show Chrome, etc? I read several posts that the BRP module got fried for whatever reason, specifically not properly grounded. Are there other modules out there that are better and less likely to get fried? All suggestions welcome. Let the suggestions begin. Thanks to all

I have same trailer. Go with BRP hitch and Show Chrome wiring harness. You can easily install wiring harness. The BRP harness doesn't like trailers other than theirs. Show Chrome wires direct to battery so you aren't messing with nanny.

[IdahoMtnSpyder]

I have same trailer. Go with BRP hitch and Show Chrome wiring harness. You can easily install wiring harness. The BRP harness doesn't like trailers other than theirs. Show Chrome wires direct to battery so you aren't messing with nanny.

BRP harness has nothing to do with nanny. In fact, it draws power for the trailer lights direct from the battery just like the Show Chrome one does. The difference is the wire from the battery is already in the connector for the trailer adapter and is fed by a 10 amp fuse in the fuse box.

[JayD]

BRP harness has nothing to do with nanny. In fact, it draws power for the trailer lights direct from the battery just like the Show Chrome one does. The difference is the wire from the battery is already in the connector for the trailer adapter and is fed by a 10 amp fuse in the fuse box.

You are correct about the nanny. It is the BRP control module that doesn't like other trailers. I know I went through two of them before I switched to Show Chrome. No problems since.