-
Very Active Member
Rotary Cannon
I like that rotary cannon gatling gun exhaust. Very cool looking plus they sound good too.
-
SpyderLovers Founder
-
Navigation position
Originally Posted by Lamonster
Some teaser pics from the F3 project. These parts were printed out and test fit before going to the mill Great way to prototype parts. Wait till you see the rest.
Oh and I do have a bolt-on hitch for it now. It turned out killer.
Happy to see the position of navigation system is in the center not on the handlebar...can't wait for this one too.
thanks
-
Originally Posted by Lamonster
I have one more piece to put on and then I start putting the body back on. Everything looks great Red.
much better than the Can-Am Red
-
SpyderLovers Founder
Originally Posted by Souzan Druy
Happy to see the position of navigation system is in the center not on the handlebar...can't wait for this one too.
thanks
I was going to make it adjustable but it put it too high for the look I wanted but it works out great and the angle it is now. I'm one of those guys that needs a gps to find my way home so this was a must have for me and I'm sure it will be for others too.
-
Very Active Member
Originally Posted by Lamonster
I was going to make it adjustable but it put it too high for the look I wanted but it works out great and the angle it is now. I'm one of those guys that needs a gps to find my way home so this was a must have for me and I'm sure it will be for others too.
Any chance of Hitch pics 😎 Do you think you're gonna be selling them??? BTW everything looks great so far!!!!! My dealer just received their first F3 n I'm leaving shortly to go have a touchy feely session w it😎
-
Very nice-Lamonster
Hello,
New to Spyders this F3-S is my first. The manual didn't come with the unit so the dealer ordered one for me.
I have the one you started out with. My questions are very basic: How do you re-charge the battery on the F3-S? And can a CB/blue tooth/intercom
system be added to it? Are you planning to sell the gps mount that you made? I would be interested in getting one.
Thanks for your assistance.
Again your bike look great.
-
NICE WORK
Nice looking mods Lamont thanks for the sneak peek
-
SECONDARY EXHAUST REMOVAL/REPLACEMENT
Originally Posted by chuck gross
Nice looking mods Lamont thanks for the sneak peek
I like the sound with the Secondary Exhaust replaced, with the stock muffler video
-
Curious with the nanny on the F3 if a hitch is fabricated. I have read that special programming has been done for the Spyders that have hitches as standard equipment. All this would not be the case of the F3.
Another Day To Be My Kid's Dad [emoji379]
-
SpyderLovers Founder
Originally Posted by GunDoctor
Curious with the nanny on the F3 if a hitch is fabricated. I have read that special programming has been done for the Spyders that have hitches as standard equipment. All this would not be the case of the F3.
Another Day To Be My Kid's Dad [emoji379]
This is what I've been told too but they also said the GS/RS had the same programing "no trailer" and I put over 50,000 miles on mine with a trailer pushing it as hard as you could push it with no ill affect.
-
Works for me, you're the man. Build it and they will come
Another Day To Be My Kid's Dad [emoji379]
-
Originally Posted by Lamonster
Some teaser pics from the F3 project. These parts were printed out and test fit before going to the mill Great way to prototype parts. Wait till you see the rest.
Oh and I do have a bolt-on hitch for it now. It turned out killer.
Lamonster - When do you expect the passenger rails to be ready for order? Do you have an idea on cost? Any plans for a center mount that can hold phones?
-
Originally Posted by Smallz
Lamonster - When do you expect the passenger rails to be ready for order? Do you have an idea on cost? Any plans for a center mount that can hold phones?
And can they be painted/color sanded to match the orange frame?
-
SpyderLovers Founder
Originally Posted by Smallz
Lamonster - When do you expect the passenger rails to be ready for order? Do you have an idea on cost? Any plans for a center mount that can hold phones?
Originally Posted by Smallz
And can they be painted/color sanded to match the orange frame?
Right now we have 34 new part numbers for the F3 including a phone mount. Not sure on production dates yet but I'll keep you posted.
-
SpyderLovers Founder
-
SpyderLovers Founder
-
SpyderLovers Founder
-
SpyderLovers Founder
-
Looking good and enjoying your updates. Thanks and keep them coming.
-
Looking like it's starting to take form.
Another Day To Be My Kid's Dad [emoji379]
-
Like the new Tailgunner exhaust,sound is awesome !
Did you get new body panels made or just have Nathan paint the OEM panels?
-
Project is coming along nicely! Excited to see the finished product.!
-
Very Active Member
It's really starting to take shape!
Looks Great!
-
Very Active Member
Sweeeet, Nice Work!!
Thanks Lamont for keeping us updated on this F3 project bike. I probably won't be going to Daytona, but hopefully some pictures & videos will be posted here. Keep up the great work.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|