-
Nice work!
I would appreciate a copy to please. Jwulf@sio.midco.net.
Thanks!
-
hitch bag
Please send the info
JAMJAM41@AOL.COM
Thanks,
Jerry
-
hitch bag
May I have a copy of the plans?
Send them to dbroy@knology.net
Thanks, Dan
-
Thanks & Great idea - could I please get a copy of the plans & photos?
Great idea!
Could I please get a copy of the plans & photos?
Email: moorerandy@me.com
Thanks!
Ride safe and all my very best.
- Randy
-
Back Rack
May you please email to Luckess9933@gmail.com a step by step Instructions
Thanks
-
Very Active Member
Question
So has anyone received the instructions? I asked a long time ago and no response!
-
Intructions/ photos please
would you please send instructions/photos to mrspyder2011 at hotmail.com
Thanks
-
Go and get the PAKIT RAK it is better or go to seal floor boards he has one also available.
-
Trailer
Originally Posted by mbelisle
If your looking for some extra storage without pulling a trailer this might be an option for you? A simple DIY project that only takes a couple of hours to build. I put some photos and instructions together however the file is too big to load up on this string. Flip me your email and I will send my notes. I just did a test run with my wife 1800 kms through the mountains and it easily carried all our cold /wet weather riding gear allowing us to enjoy the warm 30 degree C sun. Love my RT. Marty
Please send us your notes. This is just the ticket for what we need. Very innovative!
-
Trailer
Originally Posted by mbelisle
If your looking for some extra storage without pulling a trailer this might be an option for you? A simple DIY project that only takes a couple of hours to build. I put some photos and instructions together however the file is too big to load up on this string. Flip me your email and I will send my notes. I just did a test run with my wife 1800 kms through the mountains and it easily carried all our cold /wet weather riding gear allowing us to enjoy the warm 30 degree C sun. Love my RT. Marty
Please send us your notes. This is just the ticket for what we need. Very innovative!
Send to barbrasharp@msn.com
-
Me 2 plz!
Yup I would like instructions also! sbgirlmh49@aol.com
Thank you!!!!
-
Hitch bag
Originally Posted by mbelisle
If your looking for some extra storage without pulling a trailer this might be an option for you? A simple DIY project that only takes a couple of hours to build. I put some photos and instructions together however the file is too big to load up on this string. Flip me your email and I will send my notes. I just did a test run with my wife 1800 kms through the mountains and it easily carried all our cold /wet weather riding gear allowing us to enjoy the warm 30 degree C sun. Love my RT. Marty
Looks great send to whiteyron@msn.com Thanks
-
Very Active Member
Originally Posted by finless
Nice but this brings up a question. There is a weight limit for the trunk. Adding more weight to the rear like that, isn't that a problem?
I would think whatever the tongue weight of the 622 trailer is, this should be the limit for this idea too?
Bob
I believe the tongue weight is 40 lbs i think.
Happy Spyderlovers
-
Very Active Member
You could probably shave a few pounds by using wood. If I had a hitch I'd have to make one just for heck of it.
Two Wheelers from 1963-2011
Three Wheelers:
2011 RT(Red)
2014 RT(white)
2016 F3T(red)
2022 RT current ride(silver)
__________________
2016 Slingshot
2018 Vanderhall
2019 Slingshot
-
Anyone?
Did anyone ever get the plans for this hitch kit? If so, could you please forward them to me at john_97col@hotmail.com
Thanks in advance,
Brian
-
Very Active Member
Originally Posted by usn97ret
Did anyone ever get the plans for this hitch kit? If so, could you please forward them to me at john_97col@hotmail.com
Thanks in advance,
Brian
And to me bespringer12@gmail.com
Thanks
-
Active Member
2017 F3- Limited
F4 23" Windshield, Ultimate Backrest, Spyder Cuff, SpyderPops Bump Guard, Sena SMH10 Intercom, BajaRon Sway Bar, Baker Cup Holder, RT-622 trailer w/Spyder Pops Bump Guard
-
Originally Posted by finless
Nice but this brings up a question. There is a weight limit for the trunk. Adding more weight to the rear like that, isn't that a problem?
I would think whatever the tongue weight of the 622 trailer is, this should be the limit for this idea too?
Bob
Yes Bob, stick to recommended hitch weight of the trailer and things should be fine. No problems yet with a few thousand kms loaded with cold weather gear.
-
Originally Posted by pwm
Never got a response
So sorry everyone I was caught up with my winter ride (BRP 800 etec Renegade). Just noticed the posts as Spyder season is now on the brain. Everyone who sent an email I replied today.
Marty
-
Thank you very much! Now to find me a guy to make this for me!
-
Hitch Bag
If anyone else would like a copy of the instructions please flip me an email directly at mbelisle@eastlink.ca
Have fun riding
Marty
-
Active Member
Hitch
What do you think it weighs?
How much did it cost in parts?
Labor?
can you send plans, please: pwpalmbay@gmail.com
thanks
-
Look at PAKIT RAK or SEALFLOORBOARD they have great racks to put on back of spyder trailer hitch.
-
Great mod. Please send info
dkenney10@comcast.net
-
Can you copy these plans to me also. camogirl48@gmail.com
We are leaving on a trip in September and this would be perfect. Better than a trailer for us.
Thanks.
Originally Posted by mbelisle
If your looking for some extra storage without pulling a trailer this might be an option for you? A simple DIY project that only takes a couple of hours to build. I put some photos and instructions together however the file is too big to load up on this string. Flip me your email and I will send my notes. I just did a test run with my wife 1800 kms through the mountains and it easily carried all our cold /wet weather riding gear allowing us to enjoy the warm 30 degree C sun. Love my RT. Marty
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|