-
Very Active Member
Garmin Nuvi 500 Mount
Is this part the correct mount for the back of the Garmin Nuvi 500?
RAM-B-347U.jpg
I'm trying to help a guy mount his Garmin Nuvi 500 and he is not computer savvy at all so I'm trying to figure out what he needs... and he lives about 100 miles away so I can't look at his Garmin.
Thanks
JT
-
Very Active Member
HiYa JT !!
I have the Garmin Nuvi 550, which is the same as the 500.
Went to the Ram Mount site.
He needs the cradle for his GPS - RAP-HOL-GA32U
mount for cradle -- RAP-B-378-238U
If the ball you pictured is 1 inch, its right.
The RAM cradle for the back of his GPS has a diamond shape for the ball mount part which screws into that diamond.
The one you pictured would work for flush mount on the bike.
I think this is what you were looking for.
Tommy J.
Last edited by fireplug98; 04-19-2014 at 07:18 AM.
F3L SE5 Black -- F4 windshield w/wings, Reggie LED headlights, driving lights & Cyclops LED, Ultimate seat, Fox shocks, BajaRon swaybar, Lamont highway centerline pegs & 3rd peg, Lamont belt tensioner, K&N air filter, Baker air wings & cup holder, CanAm hitch.
-
Very Active Member
Tommy,
Thanks, so then the RAM-HOL-GA32U and the RAM-B-238U and the RAM-B-201U-A (which I stock) will mate up to the "B" ball on my dash mount.
RAM-HOL-GA322.jpgRAM-B-238U.jpgRAM-B-201U-A.jpgDM-2 Installed-500x500.jpg
Is the Garmin Nuvi 500 series popular enough for me to stock the mount and triangle ball?
Thanks
JT
-
Very Active Member
HiYa JT
To be honest with ya, you might not want to.
You can still buy the 500 on web sites but I think Garmin has replaced it with the 600 series,
which has been restyled.
I might stock a few of the balls and the different length mounts that attach to the balls.
Those would all be the same for all the different RAM cradles.
Tommy J.
F3L SE5 Black -- F4 windshield w/wings, Reggie LED headlights, driving lights & Cyclops LED, Ultimate seat, Fox shocks, BajaRon swaybar, Lamont highway centerline pegs & 3rd peg, Lamont belt tensioner, K&N air filter, Baker air wings & cup holder, CanAm hitch.
-
Very Active Member
Hi Tommy,
Thanks for the info. I'll get Pete fixed up now and add the ball mount to inventory.
Thanks
JT
-
Very Active Member
You bet cha !!!!!
Tommy J.
F3L SE5 Black -- F4 windshield w/wings, Reggie LED headlights, driving lights & Cyclops LED, Ultimate seat, Fox shocks, BajaRon swaybar, Lamont highway centerline pegs & 3rd peg, Lamont belt tensioner, K&N air filter, Baker air wings & cup holder, CanAm hitch.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|