It looks as a great holder but my concern is that if you use a tank bag, you could not use the cupholder. When I turn the handlebars completely, they hit the tank bag without the cupholder. Could they be mounted with the cup on the front instead of the back?
2015 RT Ltd , Canamspyderaccessories Brake pedal ext. Red
Why don't vendors who post here direct link to the product so we can further view and purchase? If I wanted to call on a phone I wouldn't be on a internet to begin with....
I'm glad there are vendors out there making stuff for us and I'm not bashing but ....... It seems to me a cup mounted on the handlebars has the potential of being unsafe. Aside from hitting or hanging up on things as already mentioned, what about liquid splashing out? I ended up mounting a ram ball on the dash above the left speaker. Then I installed a ram cup on a short arm. It sits clear of the mirror and gauges and even with a 16oz bottle when steering the handlebars pass over it.
I'm glad there are vendors out there making stuff for us and I'm not bashing but ....... It seems to me a cup mounted on the handlebars has the potential of being unsafe. Aside from hitting or hanging up on things as already mentioned, what about liquid splashing out? I ended up mounting a ram ball on the dash above the left speaker. Then I installed a ram cup on a short arm. It sits clear of the mirror and gauges and even with a 16oz bottle when steering the handlebars pass over it.
WILL THIS CUPHOLDER FIT ON A 2013 ST? Sorry for shouting, did not get an answer the last time I asked. No reply to email I sent either.
sorry for the delayed answer, but yes the Cup Holder will fit on the ST. Its kinda tricky because you will have to order the Universal Cup Holder. the one for the RT mounts will not fit the ST.
Thank You
if you have any further questions just give us a call at 1800-451-9464
I'm glad there are vendors out there making stuff for us and I'm not bashing but ....... It seems to me a cup mounted on the handlebars has the potential of being unsafe. Aside from hitting or hanging up on things as already mentioned, what about liquid splashing out? I ended up mounting a ram ball on the dash above the left speaker. Then I installed a ram cup on a short arm. It sits clear of the mirror and gauges and even with a 16oz bottle when steering the handlebars pass over it.
to prevent liquid from splashing out ........................... put a cover on it or screw the cap back on.
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
I may have a stupid question and hope you guys will excuse me for asking it, but why would you even want a cap holder? Do you drink while riding your ?
I may have a stupid question and hope you guys will excuse me for asking it, but why would you even want a cap holder? Do you drink while riding your ?
Not a stupid question, i have (for lack of a better word) a Phobia that requires me to be quenched most of the time and yes i do drive and drink (Water only)
Cruzr joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer