-
Tow hitch
Does any one know anything about These hitches
-
Looks like it attaches to the rear fender supports. Run far away from these. Fender supports have been breaking off all by themselves since 2008, without the weight of a trailer on them.
-
Originally Posted by dave01
Looks like it attaches to the rear fender supports. Run far away from these. Fender supports have been breaking off all by themselves since 2008, without the weight of a trailer on them.
-
-
What rear fender?? I took my off..lol
-
Originally Posted by Spy+
What rear fender?? I took my off..lol
Huligan......
-
No hitch for him...
-
Very Active Member
I have been running with no rear fender since the Chicago owners event. We had it duct-taped on for the 3 days home. Bought a BushTec hitch after that and been running fender free and towing a trailer ever since.
Last edited by hawkiii; 11-08-2012 at 11:58 AM.
Very Happy Spyder Guy
The 2015 F3 has over 46,000 miles
Have Spyder...Will Travel
-
Check this one out...It's not only cheaper but intstallation is a breeze...Connects thru the rear axle and can be put on or taken off in about 5 minutes...The seller also has a direct wire harness for $39 and it's a straight forward direct plug in to a standard 4 wire plug. I've had it on my rS
for 2 years now and absolutely zero problems..
http://www.ebay.com/itm/Can-Am-Spyde...-/330518357006
-
Originally Posted by Black Pig
I looked at the parts list and it looks like it supported by their brackets and not the Spyders fender brackets. It may be a way to haul light loads. Here's another RS hitch www.ebay.com/itm/Can-Am-Spyder-RS-Trailer-Tow-Hitch-/330518357006 . I'am going to look into them.
Mike
Last edited by MikeinGA; 11-08-2012 at 08:33 PM.
-
-
Originally Posted by Black Pig
On the OP I contacted them and it'll tow 550lbs (gross). But I wasn't able to find a parts list.
That being said I do like Hawkii's offering though.
While in principal it looks like a good idea the fender support brackets are the weak point. If you were to create some new brackets out of Kryptonite it would work great.
-
Originally Posted by Black Pig
On the OP I contacted them and it'll tow 550lbs (gross). But I wasn't able to find a parts list.
That being said I do like Hawkii's offering though.
@Ga BK, I got the impression that the one I found comes with it's own fitting kit and doesn't use the existing (chocolate) fender mount.
I really like Littlebadwolf's offering best though. I might chase that one up.
-
SpyderLovers Founder
-
-
Originally Posted by Lamonster
Here is the parts list and instructions. www.industriesjack.com/3-Spyder%20BRP.html
Scroll down the page to Guide d'installation and select.
Mike
Last edited by MikeinGA; 11-09-2012 at 05:32 PM.
-
Originally Posted by Black Pig
On the OP I contacted them and it'll tow 550lbs (gross). But I wasn't able to find a parts list.
That being said I do like Hawkii's offering though.
Here is the parts list and instructions. www.industriesjack.com/3-Spyder%20BRP.html
Scroll down the page to Guide d'installation and select.
Mike
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|