-
-
Originally Posted by murlaw703
Today I met and rode with Spyderryder. He has a beautiful black Premium, the first RT sold in Las Vegas in fact. I was struggling with my cup holder and my wife was missing hers, so my friend told me to take a look at his. I was totally amazed and told him he was a "genius". He replied that he was just an Amazon.com shopper. This cup holder is made of tough plastic, gently clamps on with very sturdy clamps that are plastic with soft rubber inside to protect the byke and can be mounted anywhere on both the back and front of the byke. I had to get one. He told me to go to Amazon.Com and look at "Brica" in the Baby Section ! It is a cup holder made for strollers and it costs just $12
It looks outstanding, pops right on and off with no messing around with placement, etc. that a lot of us have struggled with. He is a genius !
Here is the link : http://www.amazon.com/Brica-64009-Dr...5658775&sr=8-2
Try one...I just ordered three Paint it, beat it or write it bad checks, but you have to get one ! Below is a picture of the "Perfect Cupholder":
Got one ... just love it! I think Yazz originally mentioned it.
thehawk
In theory, there is no difference between theory and practice ... in practice, however, that's just a theory.
-
Perfect GPS / Phone Holder Too !
They also make a mobile phone holder that is perfect for those of us who sometimes use the phone for navigation. This will clip right onto the top of the dashboard...
http://www.amazon.com/Brica-64012-Ph...5668124&sr=1-6
-
Kudos to Yaaz ! I missed that in the forums...Thanks !
Originally Posted by thehawk
Got one ... just love it! I think Yazz originally mentioned it.
thehawk
-
Active Member
I want, but they won't ship to Canada....bummer
-
Active Member
I checked around yesterday and Toys R Us has them for sale.
Originally Posted by strictlyred
I want, but they won't ship to Canada....bummer
-
-
Active Member
-
Active Member
-
BRICA CUP POD
-
[QUOTE=murlaw703;446604]Today I met and rode with Spyderryder. He has a beautiful black Premium, the first RT sold in Las Vegas in fact. I was struggling with my cup holder and my wife was missing hers, so my friend told me to take a look at his. I was totally amazed and told him he was a "genius". He replied that he was just an Amazon.com shopper. This cup holder is made of tough plastic, gently clamps on with very sturdy clamps that are plastic with soft rubber inside to protect the byke and can be mounted anywhere on both the back and front of the byke. I had to get one. He told me to go to Amazon.Com and look at "Brica" in the Baby Section ! It is a cup holder made for strollers and it costs just $12
It looks outstanding, pops right on and off with no messing around with placement, etc. that a lot of us have struggled with. He is a genius !
Here is the link : http://www.amazon.com/Brica-64009-Dr...5658775&sr=8-2
where did your friend have his located at? I have been looking for one that I can clip on for the driver.I have a cup holder already that clips on the passenger hand grip.
-
This will clip right onto the top of the dashboard...
I take it these will hold well to the top of the dash? I am looking for both drink and phone holders. This may be the cheap man's solution...
-
-
Thank you, thank you, thank you for the heads up on this product.
These are great. I received 2 cup holders and the phone holder yesterday and could not be more pleased.
Great price, easy as pie on and off. I put my wife's on the left passenger handle and mine on the dash...hold like glue.
Also put the phone holder on the dash with no problem. Phone holder is a tight fit with a Motorola Razr but it still works, the Iphone would be a perfect fit.
Ordered mine through Amazon.
Oh and they look good too.
-
Rockin Member
Bought our at Toys R Us just before Spyderfest and it worked great.
Had it attached to the front dash lid.
I will try and spray paint it, dont like the color.
ImageUploadedByTapatalk1336232730.328352.jpg
2011 Pearl White RT Limited
HMT Brake Light, Fender Tips Kit, Mudflap Lights, GloRyders, Seal Floorboards, Powerlet 12V, Garage Door Momentary Button, Bump Skid, Elka's Stage 1, Ultimate Sea, Air Wings
Member of the Woodstock Spyder Ryders (Illinois)
-
Cheap Man's Solution...nah
These are the smart man's solution i.e. no drilling, no RAM mounts, no spilling and move them wherever you want. Your only limitation is your limitations..lol.
-
Color
I don't like the color either ! Do you know what paint would stick to these babies ? (pardon the pun)
Originally Posted by Macca
-
They are cheap enough that if you screw it up painting it you can just buy another one LOL.
I don't mind the color too much but that lime green button.....sheeesh.
-
-
Rockin Member
Originally Posted by murlaw703
I don't like the color either ! Do you know what paint would stick to these babies ? (pardon the pun)
I would think Kyrlon Spray Paint Fusion for Plastic should work fine.
2011 Pearl White RT Limited
HMT Brake Light, Fender Tips Kit, Mudflap Lights, GloRyders, Seal Floorboards, Powerlet 12V, Garage Door Momentary Button, Bump Skid, Elka's Stage 1, Ultimate Sea, Air Wings
Member of the Woodstock Spyder Ryders (Illinois)
-
Lime Greem...hum
Well that lime green button got to me also, so I just finished painting the RT the same color so my $12 cup holder doesn't look out of place...lol...not.
Originally Posted by Clicker1944
They are cheap enough that if you screw it up painting it you can just buy another one LOL.
I don't mind the color too much but that lime green button.....sheeesh.
-
Active Member
My RT cup holder from RV Camping world for $6.00
Originally Posted by murlaw703
Today I met and rode with Spyderryder. He has a beautiful black Premium, the first RT sold in Las Vegas in fact. I was struggling with my cup holder and my wife was missing hers, so my friend told me to take a look at his. I was totally amazed and told him he was a "genius". He replied that he was just an Amazon.com shopper. This cup holder is made of tough plastic, gently clamps on with very sturdy clamps that are plastic with soft rubber inside to protect the byke and can be mounted anywhere on both the back and front of the byke. I had to get one. He told me to go to Amazon.Com and look at "Brica" in the Baby Section ! It is a cup holder made for strollers and it costs just $12
It looks outstanding, pops right on and off with no messing around with placement, etc. that a lot of us have struggled with. He is a genius !
Here is the link : http://www.amazon.com/Brica-64009-Dr...5658775&sr=8-2
Try one...I just ordered three Paint it, beat it or write it bad checks, but you have to get one ! Below is a picture of the "Perfect Cupholder":
DSCF7777.jpg
-
Mine's prettier na, na, na, na, nah!
It has a lime green button.
-
Originally Posted by strictlyred
I want, but they won't ship to Canada....bummer
You Canadians take no drinking and driving to the max!
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Very Active Member
I'm sure the plastic paint will do, but there is a product called Duracoat that people use to paint their composite frames on firearms that is really durable, may be a more permanent solution. Unfortunately, its somewhat pricey for a cheap cupholder. But hey, we own Spyders, EVERYTHING is expensive!!!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|