-
How Do I Wire BOTH Fiamm High & Low Note Horns?
So, I'd like to add a Fiamm High Note Horn to my Fiamm low note horn. Both are disc horns. I was thinking just attach one to the other. Then I thought about not exploding anything, so I thought I'd ask wiser minds.
Thanks in advance!!!!!
~Sandee~
2016 RT-L (Purchased used in February 2018)
RT Dash Mount (from JT's Spyder Store)
Kuryakin Trident Highway Pegs
Hopnel Pouch
Magic Mirrors
Spyderpops Foam Handgrips
Iron Butt #35273
Girls on Spyders #2779
-
Very Active Member
Just run jumper wires from one to the other. You will need "piggyback" terminals to give you the secondary jumper connections to put on the first horn.... I have this currently set up on mine with two horns... Here is one option:
https://www.amazon.com/Heschen-Piggy...2942348&sr=8-6
I have had my horns installed like this since I got the byke in 2016 with NO issues... You just need to make sure the power draw is within the fuse rating.
Last edited by hypurone; 04-12-2024 at 12:22 PM.
'15 F3-S Pure Magnesium Metallic - Mad Max Edition
'15 Mclaren 650S Coupe - Aurora Blue
"You Were Really Flyin', When I Passed You Back There!"
Chuck
2015 F3-S , Pure Magnesium Metallic/Steel Black Metallic
-
Thanks, Hypurone. I've got a jerry rigged solution set up, pending Amazon delivery.
~Sandee~
2016 RT-L (Purchased used in February 2018)
RT Dash Mount (from JT's Spyder Store)
Kuryakin Trident Highway Pegs
Hopnel Pouch
Magic Mirrors
Spyderpops Foam Handgrips
Iron Butt #35273
Girls on Spyders #2779
-
I added dual horns on my Yamaha FJR and just made a positive and negative jumper wires that plugged into the factory harness. Never a problem but now the wife wants dual horns on her 2020 Spyder RTL so I will be laying on the ground doing the same wiring thing to her Can Am.
-
Very Active Member
As long as you're using the proper wire gauge to handle the load, should be no problem with jumping from one to the other.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|