-
Active Member
My guess would be the battery. I've had trouble on my bikes with batteries that will turn the bike over but wont allow it to start. A load test is the only way to properly check it. If it's below 10.5v under load the battery likely has a dead cell
A bad battery can show a false voltage when it has surface charge, this occurs for a length of time after a battery has been charging. It can read a full voltage of 12.6 even though it has a bad cell.
Next I would be pulling the plugs...or at least one to see what they look like.
Last edited by nightfalcon; 11-15-2023 at 07:23 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|