-
Active Member
Any riders with the Ultimate Tall Boy seat?
I’m 6’5” and I have my pegs on position 5, but I still need some extra legroom. I’m looking at the Tall Boy with a backrest, but I’m curious to see if anyone else has this setup. I’m riding an F3-T.
-
Active Member
I have one on my F3T and am very happy with it. I'm 6'2" and go about 230.I have also put on LaMonster's black diamond floorboards. They are in the #4 position.
Dave....
2016 Red/Black F3T w/ Audio
Bajha Ron Swaybar, BRP driving lights
F4 Windshield, Ultimate Tallboy Seat
BRP Passenger Backrest
Custom Dynamics fender lights
Tricled Rear Bag lights w/ Flashing Brake Modulator
Wolo Horn, Lamonster's Bungee Buttons
Spyderpops Bumper Skid
-
Active Member
I'm 6'4" 240lb and had a custom seat made by Diamond Seats for my 21 F3L. This impacted both leg comfort and seat comfort since the factory seat was too soft. They have several style choices. But most important, you send them your height, weight, and inseam measurements. They choose the best density and seat height. It was a nice improvement and was similar in price to other options. I also changed to the full F3 floorboard from canam spyder accessories. This lets me also change my foot position which relieves legs and also low back during a ride.
DiamondSeat_4.jpg
Last edited by GRHorst; 07-25-2023 at 09:39 AM.
_________________________________
GR Horst - Reading, Pennsylvania, U.S.A.
-
Active Member
Originally Posted by MNBK
I have one on my F3T and am very happy with it. I'm 6'2" and go about 230.I have also put on LaMonster's black diamond floorboards. They are in the #4 position.
The one thing I also like about the Ultimate is that it’s one piece on their pan. As for floorboards, I’m kind of leaning toward the Ulimate from value accessories.
-
Active Member
Originally Posted by GRHorst
I'm 6'4" 240lb and had a custom seat made by Diamond Seats for my 21 F3L. This impacted both leg comfort and seat comfort since the factory seat was too soft. They have several style choices. But most important, you send them your height, weight, and inseam measurements. They choose the best density and seat height. It was a nice improvement and was similar in price to other options. I also changed to the full F3 floorboard from canam spyder accessories. This lets me also change my foot position which relieves legs and also low back during a ride.
DiamondSeat_4.jpg
Sounds similar to a Russell Day Long, which is one of the most comfortable seats I’ve ever owned.
-
Very Active Member
Originally Posted by Pikester
The one thing I also like about the Ultimate is that it’s one piece on their pan. As for floorboards, I’m kind of leaning toward the Ulimate from value accessories.
I have those floorboards and you will love them.
IMG_20230318_143907256.jpg
Last edited by CloverHillCrawler; 07-25-2023 at 05:11 PM.
2020 F3 SE6
Safety and Lighting: LED Headlight upgrade, IPS LED Fog lights, Show Chrome LED Fender Signals, LED Signature Light, Tric LED Afterburnerz, MotoHorn 2.0
Suspension: Wilbers Front and Rear Shocks, BajaRon Sway Bar, Vredestein Quatrac Front and Rear Tires
Comfort: Blue Ridge Windshield, Corbin Dual Touring Saddle, Ultimate Floorboards, OEM Passenger Backrest with Rear Shelf, OEM Passenger Floorboards Modified with High Risers from Pierre
Tackform Center Mount Phone Holder w/ rapid charging USB-C.
-
Active Member
Last edited by Pikester; 07-26-2023 at 05:31 PM.
-
Very Active Member
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
Active Member
Originally Posted by Peteoz
They worked well with size 15s on my F3, Pikester…..you should love them
Pete
Thanks Pete! Did you have an RDL seat on your F3?
-
Very Active Member
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
Active Member
Originally Posted by Peteoz
Hahaha…….I have an RDL on every 2 or 3 wheel bike I have owned since the ‘90s, Pikester. I got sick of trying aftermarket seats and then having to sell or try to return them. I now automatically factor the cost of a new Daylong into every new ride. It adds about $2500aud by the time I source an older seat in the US, and have the RDL shipped out to Aus, but it’s worth every penny to me
Oooooops, sorry for turning that into a sales spiel
Pete
I can’t blame you! When I had my GS1250, I rode to Shasta Lake and Jay made the seat for me in about 6-7 hours. Best seat I have ever owned and the ride down highway 1 was fabulous!!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|