-
Very Active Member
Seat Latch & Support Post Photos for Don60
Don, here’s the photos of the latch and the support post. The white wire is my manual latch opener that I didn’t bother taking off. Hopefully you can see the black cable tie holding the latch open.
PeteDB2451A0-81FA-4E20-9932-C186BEB99497.jpeg C510F8D5-68B0-42EE-A245-EBA9160FB42D.jpeg
Last edited by Peter Aawen; 09-06-2022 at 07:05 PM.
Reason: Expanded Title to briefly mention subject/purpose.... ;-)
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
Thank you so much, pictures are great. Will look at that next couple of days. Will keep you updated.
2021 Spyder RT-L - Asphalt Grey
• Vredestein tires all around
• Rolo Laser Alignment
• Lamonster tire balancing rings/front
• Lamonster Sway Bar
• Lamonster belt tensioner
• K and N air filter
• Rear cowl - in place when you remove rear box
-
Peteoz; thank you again for your help, easiest thing to do! I thought it had much more tension to the spring, but a simple tie and we now have no worries when we need gas!
2021 Spyder RT-L - Asphalt Grey
• Vredestein tires all around
• Rolo Laser Alignment
• Lamonster tire balancing rings/front
• Lamonster Sway Bar
• Lamonster belt tensioner
• K and N air filter
• Rear cowl - in place when you remove rear box
-
Very Active Member
Originally Posted by Don60
Peteoz; thank you again for your help, easiest thing to do! I thought it had much more tension to the spring, but a simple tie and we now have no worries when we need gas!
Good to hear, Don. I have had it disconnected for a couple of months now, and have had zero issues. I’m actually trying to work out a hinge system under the seat, so that when you lift the seat, the support bar drops down automatically, just to remove an extra step in the process.
I’m sure someone will be along shortly to say “but, but, but…..someone will syphon your gas”
Pete
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
Very Active Member
2022 Petrol Metallic RT Limited / 'PYDER'
Peter Pan has struck again!
-
Very Active Member
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|