-
Active Member
Looking for a solid F3 mech - any recommendations - WV?
Looking for a solid, dependable, knowledgeable mech to do some upgrades on my F3. Let me know if you know of anyone that you could recommend. Appreciate it.
2021 F3 L , Stock Plugs (COILS, NOT WIRES!) Stock Brake Pedal Magma Red
-
Very Active Member
I don't know where you're located in West Virginia, but the guys at the Can Am dealership in Jackson, Ohio are good. They're also very busy this time of the year though.
-
Active Member
Well, Jackson, OH looks to be at least an hour or more North of Charleston. Charleston is 5 hours west of me (I'm close to Harpers Ferry/Eastern panhandle). So that's about a 7 hour ride... A bit far, but I appreciate the input.
2021 F3 L , Stock Plugs (COILS, NOT WIRES!) Stock Brake Pedal Magma Red
-
Very Active Member
MotorSportsInc In Hanover PA. Very Good Can Am Dealer, with very knowledgeable service department and prices better than ones a little closer to you. It is a bad time of year to get things done tho because the good ones are very busy this time of year. What upgrades do you want to do?
My Spyder
-
Active Member
Some of my list of farkles, mostly. I don't have a way of lifting the Spyder 24" so installing the anti-sway bar upgrade is out for me. I need to have my FIN installed and my GPS system wired in. I'd like to have the titanium/stainless stems installed on the wheels, and I'd like to balance them before re-mounting (then I can install the FoBo2). I'm not setting the auxiliary or gucci lighting in place until I get the Neutrino Aurora+ (that will be sometime in June). Also, since I have an extended warranty on the bike, I want to find a 'home dealer' that isn't either 3 hours away or doesn't just generally suck.
2021 F3 L , Stock Plugs (COILS, NOT WIRES!) Stock Brake Pedal Magma Red
-
Very Active Member
Originally Posted by chunkmonk
Some of my list of farkles, mostly. I don't have a way of lifting the Spyder 24" so installing the anti-sway bar upgrade is out for me. I need to have my FIN installed and my GPS system wired in. I'd like to have the titanium/stainless stems installed on the wheels, and I'd like to balance them before re-mounting (then I can install the FoBo2). I'm not setting the auxiliary or gucci lighting in place until I get the Neutrino Aurora+ (that will be sometime in June). Also, since I have an extended warranty on the bike, I want to find a 'home dealer' that isn't either 3 hours away or doesn't just generally suck.
If you go to any rallies that Captjam is at, he charges $75.00/hour and is the most competent wrench twister that I know.
Al in Kazoo
All the great movements in the world began with a cup of coffee!
2018 F3-T
My mods: Can am Trailer hitch, USB and 12 volt power outlets, Gustason windshield, Bead rider seat cushion, battery harness for electric gear and battery tender, Time out trailer.
-
Very Active Member
Originally Posted by chunkmonk
Some of my list of farkles, mostly. I don't have a way of lifting the Spyder 24" so installing the anti-sway bar upgrade is out for me. I need to have my FIN installed and my GPS system wired in. I'd like to have the titanium/stainless stems installed on the wheels, and I'd like to balance them before re-mounting (then I can install the FoBo2). I'm not setting the auxiliary or gucci lighting in place until I get the Neutrino Aurora+ (that will be sometime in June). Also, since I have an extended warranty on the bike, I want to find a 'home dealer' that isn't either 3 hours away or doesn't just generally suck.
The only dealer with a service department near you that I know of is Ridersville Cycle In BERKELEY SPRINGS, WV 25411; 75 GOOD TIMES DRIVE. the only thing I know about them is one person I know that has an F3 and takes his F3 there for service and he like them.
My Spyder
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|