I'm going to put Passenger Peg extensions on and I'm wondering if anyone has recommendations. At this point I'm leaning towards the BRP parts but I am not in a big rush so input would be appreciated.
I got these on E-Bay a while back, after reading about them in this forum. My wife loves them. They were $150, but I don't know if they are still available. ( the foot plates don't come with them) Good Luck!
www.sfbracing.net has the rear passenger floor boards. I have not seen them, but Doc bought the front floor board kit and gave them a very good review.
I'm going to put Passenger Peg extensions on and I'm wondering if anyone has recommendations.
I would definitely recommend passenger pegs; they prevent the passenger from dragging their limbs!
Seriously, I bought the BRP passenger extension pegs and BRP comfort seat and my wife is much more comfortable on the back. She's 5'10" tall. We also have the BRP sport rack/backrest.
NOTE: If you also purchase the BRP saddlebags, you'll save yourself a load of time by using the black support brackets from the saddlebag kit first. If you install the peg extension (black) brackets first, you'll have to remove them to put the ones for the saddlebags on; they are different.
I think functionally these (BRP) and the ones sold on eBay probably work the same. But I like the look of these better. Better styling and they look more substantial (probably not necessary but asthetically pleasing).
www.sfbracing.net has the rear passenger floor boards. I have not seen them, but Doc bought the front floor board kit and gave them a very good review.
Trying to see if they fit with the Corbin bags extensions.
I'm going to put Passenger Peg extensions on and I'm wondering if anyone has recommendations. At this point I'm leaning towards the BRP parts but I am not in a big rush so input would be appreciated.
I have the BRP extensions wife is very happy with them.
We have the BRP setup and they are great. What I really like about them is the black support brackets that are on the back. I would be afraid of breaking off the original peg mounts without these since you have to stand on one peg to get on the bike.
We have the BRP setup and they are great. What I really like about them is the black support brackets that are on the back. I would be afraid of breaking off the original peg mounts without these since you have to stand on one peg to get on the bike.
My wife always mounts and dismounts from the drivers peg--works best for her. I think the peg extensions would hold her weight just fine but it's just easier for her to use the drivers peg.
My wife always mounts and dismounts from the drivers peg--works best for her. I think the peg extensions would hold her weight just fine but it's just easier for her to use the drivers peg.
Michael
Good point too. That may be how she used to get on before we got the isci boards, but now they're too low for her.
We have the BRP setup and they are great. What I really like about them is the black support brackets that are on the back. I would be afraid of breaking off the original peg mounts without these since you have to stand on one peg to get on the bike.
Yes, I wondered about that myself. Seems like it could be a lot of pressure on that single mounting point.
I have been emailing the guy that sells the set I posted above. He's out of them right now but I may just give them a try when he gets more in. Sounds like a good quality product.
I've also heard very good things about the BRP extensions. Wish I could see them side by side to compare. But having this input is a big help.
Thoughts on Passenger Peg Extensions...
Reply With Quote
Originally Posted by BajaRon
Happy 
Owner
Wife loves them.
