Thinking about Dynojet PowerVision 3 PV3 Flash Tuner Can-Am Ryker 900 RPS High Perfor
So I have the KN filter as well as the iridium plugs and now the two brothers exhaust. Now it’s time for a custom fuel map based on this. One person said this then should get 20 HP. Just curious if anyone on here has tried it?
I have not done the Power Vision but its on my list as I am a long time user of Power Commander 5 tech on my current Triumph Thruxton, and my Spyder. There are several entries here on users that have the unit as well, I am sure you will hear from them. When I get my Rally, I will be getting a two brothers exhaust, custom intake (if available, and the Power Vision for sure. From what I have read on it, its impressive. I absolutely SWEAR by my Power Commander 5's. I have used them on at least 7 bikes now.
2012 RS-S , Baja Ron Plug Wire Kit and NGK Iridium Plugs Grey and Black
I have a PV3 and am waiting to install it. Under WI "Safer At Home" rules, motor vehicle servicers can remain open, and I am waiting for a decent time to head up to the tuner. Probably a couple/few weeks. He has done a few Spyders and says the improvement is "quite nice". For reference though, I have a 2019 F3-S.
2022 RT Sea To Sky
--------------------------------
There seems to be NO numbers on the Ryker with the PV3. Treal Performance has done some dyno work on stock settings changing the air intake and muffler but have said they can't get the PV3 to work on the dyno.
I have the Power Vision3 pre-installed performance map and K+N air filter installed in my Ryker Rally. There is a big difference in power delivery across the rev range. With (according to the seat of my pants) a two stroke power band type kick at top of the rev range. On a side note there is another important benefit that the Power Vision3 provides. It allows you to read and clear diagnostic trouble codes(both Active and Historic)The Power Vision3 installation guide makes it easy to install. Is it worth the money YES :-)
Last edited by Peter Aawen; 04-06-2020 at 11:19 PM.
Reason: Fixed attach display
I have the Power Vision3 pre-installed performance map and K+N air filter installed in my Ryker Rally. There is a big difference in power delivery across the rev range. With (according to the seat of my pants) a two stroke power band type kick at top of the rev range. On a side note there is another important benefit that the Power Vision3 provides. It allows you to read and clear diagnostic trouble codes(both Active and Historic)The Power Vision3 installation guide makes it easy to install. Is it worth the money YES :-)
Hi, which tune do you use for your Ryker? I have a PV3 too. Can I try your tune?
Last edited by Peter Aawen; 04-06-2020 at 11:21 PM.
Reason: Fixed attach display
So I have the KN filter as well as the iridium plugs and now the two brothers exhaust. Now it’s time for a custom fuel map based on this. One person said this then should get 20 HP. Just curious if anyone on here has tried it?