since a recent rear brake bleed, tho not immediately after, the parking brake does not actually hold anything, tho the pedal itself does properly "enagage". So if I am not on "even ground".... what do I need to look for? Thank you
Seems you need to adjust the park brake cable. There is an adjustment at the rear wheel. If you have no more adjustment then you will have to remove the park brake lever and reposition it a knotch over to get more travel. There was also a time where the cable would come off the front pulley under the right lower panel. In that case you would have to re install it. There were some simple fixes for that you may have to search it out. They would place a small "L" bracket just above the pulley wheel where the cable is connected....
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
Seems you need to adjust the park brake cable. There is an adjustment at the rear wheel. If you have no more adjustment then you will have to remove the park brake lever and reposition it a knotch over to get more travel. There was also a time where the cable would come off the front pulley under the right lower panel. In that case you would have to re install it. There were some simple fixes for that you may have to search it out. They would place a small "L" bracket just above the pulley wheel where the cable is connected....
Thanks for the information, man that parking brake was annoying, I am very happy I was able to adjust it out with the cable. Thank you.
Just another quick question, I want to get EBC Pads, and my discs are flawless at this point. DO I just install Sintered or Semi Sintered Pads? Which ones? If anyone knows, anything would help.
2012 RS-S , Baja Ron Plug Wire Kit and NGK Iridium Plugs Grey and Black
I installed the more $$ ones on the rear (I forgot which ones). The rear brake does most of the work, seeing as it is worn out when the fronts are barely 50%. Work an extra few $ not to have to do rear brakes sooner.