Hello everyone, i have a can am Rt Spyder. I am having a problem trying to find a good cup holder that won't turn on me. I lost 2 cups that fell over from my previous cup. My last cup holder was a rivco that was insulated and was closed in to keep my drinks cold. Please help and give me some advise. Tell me what type of cup works for you. Thank you
Check out RAM mounts. They have many options. Also there are vendors onthis site that have cup holders. I have 2 ---- one on the handle bars and one on the passenger grab rails for my wife. Both are RAM mounts. I think Baha Ron has some also.
Lew L
Kaos----- Gone but not forgotten.
2014 RTS in Circuit Yellow, farkle-ing addiction down to once every few months. ECU FLASH IS GREAT.
Hello everyone, i have a can am Rt Spyder. I am having a problem trying to find a good cup holder that won't turn on me. I lost 2 cups that fell over from my previous cup. My last cup holder was a rivco that was insulated and was closed in to keep my drinks cold. Please help and give me some advise. Tell me what type of cup works for you. Thank you
the butler mug www.glassact.com ive had one since 2012 best mug comes in 2 sizes priced at 89 I believe attaches to your handle bar.
Tall flag mount, spyderpops skid plate & stainless steel screen mesh, airhawk adjustable cushion, raised white lettered tires.
Hello everyone, i have a can am Rt Spyder. I am having a problem trying to find a good cup holder that won't turn on me. I lost 2 cups that fell over from my previous cup. My last cup holder was a rivco that was insulated and was closed in to keep my drinks cold. Please help and give me some advise. Tell me what type of cup works for you. Thank you
‘I have a RT and bought the Lamonster Spyder Cuff. Really solid, easy to install and looks like it was installed by the factory. I just rode 115 miles, bumpy roads...didn’t lose my drink or Cuff. I bought the Lamonster insulated bottle as well, both are quality products.
I have to agree, except we got ours from the drink to go web site. They have two, one held on with a screw works on the handle bars, and one that comes with a clamp that works very well for the passenger hand rails. We have had ours for two years now, hold both 20 and 32 ounce Yeti mugs, and we haven't come close to losing a mug. And you can't argue about the cost, could be the cheapest avaulable. They aren't fancy, but do look good and certainly do the job.
How old would you be if you didn't know how old you were?
Take a look at the CanAm Kustom Kaddy. I have one and it works well. Comes in chrome or black and costs about $43.00. Very easy install. Happy with mine.
2005 Windveil Blue Premium Mustang Convertible
2008 Honda GL1800/California Sidecar Trike, SOLD
2014 Platinum Silver Satin Spyder RTL, SOLD
Semper Fi
I have to agree, except we got ours from the drink to go web site. They have two, one held on with a screw works on the handle bars, and one that comes with a clamp that works very well for the passenger hand rails. We have had ours for two years now, hold both 20 and 32 ounce Yeti mugs, and we haven't come close to losing a mug. And you can't argue about the cost, could be the cheapest avaulable. They aren't fancy, but do look good and certainly do the job.
I have the one for the passenger hand rail as well they both work awesome
Drink to go and Contigo insulated cup with the lock on the lid so all I have to do is push in button on back and drink. Contigo cups keep ice "ice" for 24 hours. I mounted the drink holder on the backside of the handlebars.
Hello everyone, i have a can am Rt Spyder. I am having a problem trying to find a good cup holder that won't turn on me. I lost 2 cups that fell over from my previous cup. My last cup holder was a rivco that was insulated and was closed in to keep my drinks cold. Please help and give me some advise. Tell me what type of cup works for you. Thank you
i dont have a spyder yet but i do have the butler cups on a goldwing and ultra classic and am very satisified with them.No problems at all
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
Thanks to those on this thread who recommended Drink2Go -- I like the look and approach, and have just ordered a 2-pack Drink2Go offers on Amazon. (1 screw-in mount for the front handlebars, 1 clamp mount for the passenger grip bars.)
I'll update if I have any contrary opinion after installation and use, but agree with the other posters that for the price it looks hard to beat.
Regards,
Bret
2017 RT-S Orbital Blue
BajaRon Anti-Sway Bar
SpyderPops LED Bumpskid, Spyclops II LED, Full View Turn Signals & Belt Guard
Sena 20S Bluetooth Headsets
Brake Free Helmet Light
FOBO Bike for Trike
Rugged Geek RG1000 Safety Plus Jump Starter/Air Compressor
Lamonster RAM mount/Techmount TechGripper
Drink2Go Cup Holders
UltraGard Half Cover
Thanks to those on this thread who recommended Drink2Go -- I like the look and approach, and have just ordered a 2-pack Drink2Go offers on Amazon. (1 screw-in mount for the front handlebars, 1 clamp mount for the passenger grip bars.)
I'll update if I have any contrary opinion after installation and use, but agree with the other posters that for the price it looks hard to beat.
I'm looking for a cup holder for the rear grabrail on my 2014 RTLTD. When it's mounted on the rail can it swivel to keep it upright wherever it is on the rail. Thanks, Mike
I'm looking for a cup holder for the rear grabrail on my 2014 RTLTD. When it's mounted on the rail can it swivel to keep it upright wherever it is on the rail. Thanks, Mike
You can set it up at an angle of your choice (within reason) when you clamp it on there, but the normal position is (to me) the best choice. It doesn't move, and if the rear end is leaning enough to dump something out, we got a whole lot of other problems!
Regards,
Bret
2017 RT-S Orbital Blue
BajaRon Anti-Sway Bar
SpyderPops LED Bumpskid, Spyclops II LED, Full View Turn Signals & Belt Guard
Sena 20S Bluetooth Headsets
Brake Free Helmet Light
FOBO Bike for Trike
Rugged Geek RG1000 Safety Plus Jump Starter/Air Compressor
Lamonster RAM mount/Techmount TechGripper
Drink2Go Cup Holders
UltraGard Half Cover
You can set it up at an angle of your choice (within reason) when you clamp it on there, but the normal position is (to me) the best choice. It doesn't move, and if the rear end is leaning enough to dump something out, we got a whole lot of other problems!
The Wife has a small bag hanging from her arm rest and it would have to be mounted towards the front of the grab rail and still have to be upright so nothing would spill. I would need the cup to swill just a little to do this. Not a free wheeling swivel like others but be able to swivel a little and the lock in the place. Thanks, Mike
I have to agree, except we got ours from the drink to go web site. They have two, one held on with a screw works on the handle bars, and one that comes with a clamp that works very well for the passenger hand rails. We have had ours for two years now, hold both 20 and 32 ounce Yeti mugs, and we haven't come close to losing a mug. And you can't argue about the cost, could be the cheapest avaulable. They aren't fancy, but do look good and certainly do the job.
How did you get it to stretch to hold a 32 oz. Yeti cup?
Originally Posted by Devious56
I have to agree, except we got ours from the drink to go web site. They have two, one held on with a screw works on the handle bars, and one that comes with a clamp that works very well for the passenger hand rails. We have had ours for two years now, hold both 20 and 32 ounce Yeti mugs, and we haven't come close to losing a mug. And you can't argue about the cost, could be the cheapest avaulable. They aren't fancy, but do look good and certainly do the job.
Hello everyone, i have a can am Rt Spyder. I am having a problem trying to find a good cup holder that won't turn on me. I lost 2 cups that fell over from my previous cup. My last cup holder was a rivco that was insulated and was closed in to keep my drinks cold. Please help and give me some advise. Tell me what type of cup works for you. Thank you
I have the La,monster that comes with the metal cup , Love it , it is placed just so you can grab a drink while on the road