-
Originally Posted by Merlot2015
Hi Reed, I think I can help...this is what I did to eliminate the gap.
#1 - I used a hot knife to reduce the width of the anchor by approx 1/2”.
#2 - I cut away the excess seat molding material and shaped it to fit snugly into the anchor assembly.
I’ve attached the before and after pics.
Hope this helps!
This is perfect! I was wondering if those little guys were the issue but since i had my armrests installed the day i got the bike, i didn't know for sure if they were stock or part of the armrest piece. This answers it clearly. I've also reached out to Ultimate to see what they have to say but I know this answer is right and my query to them will probably just let them know there's an issue for BRP armrests.
Thanks again!
Reed
-
Very Active Member
Many thanks to all who did this already and posted their experience, I ordered and today installed these and gotta say, the hardest part for me was the @#$@#%^ Antenna.
She who must be obeyed has already tried and approved the feel and comfort. Looking forward to a Mother's day long ride.
Whilst checking them out I think I did see where the hinge of the flip up portion could be tightened up if you wanted to.
I really liked the integrated support that slipped behind the backrest.
Safe Rides,
David and Sharon Goebel
Both Retired USAF Veterans
2018 Anniversary Edition RT Limited
Baja Ron ultimate swaybar. Vredestein tires, Baja Ron Front Shock Pre-load adjusters, Pedal Box, See my Spyder Garage
IBA 70020 |
|
-
Just got ours
The wife loves them we had the dealer install them though, but they look like they great. Just wish I could get the wife to get her license so i can fall a sleep back there at the same time we had the custom dynamics third brake light installed and it looks great also. I am so afraid to tear into things afraid I will do more harm than good. But we or should I say she loves them.
Dave
-
BRP Can Am Spyder RT Passenger Armrests
Rode to the dealer yesterday to see if they had the armrests in stock and to my surprise they did. The armrests felt pretty solid. I paid for a pair and scheduled an install for next Thursday.
Last edited by 3 Wheel Rider; 05-26-2018 at 09:47 PM.
-
thanks!!!
Originally Posted by Merlot2015
Hi Reed, I think I can help...this is what I did to eliminate the gap.
#1 - I used a hot knife to reduce the width of the anchor by approx 1/2”.
#2 - I cut away the excess seat molding material and shaped it to fit snugly into the anchor assembly.
I’ve attached the before and after pics.
Hope this helps!
Great advice and great pics! could not have made it work without you post!
-
Active Member
Happy that I could help out...enjoy your new armrests!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|