-
Tank Protector Options???
What are you using for tank protection? Wrap decals or Tank bra???
I've seen Pete's Tank Wrap option, but thought I'd drop a line here to take a reading on what the current "go-to" may be.
Looking for something both economical and functional.
Thanks for your time!!!
-
Very Active Member
canamspyderaccessories.com has some good options.
2016 F3 Limited
2019 Ryker Rally
2014 Suzuki V Strom 650
2020 CSC TT 250
-
Very Active Member
-
Very Active Member
I was wondering what was the purpose of a tank protector myself. Sport bike riders use them because they lay forward on the tank, on an F3 you dont. What is a tank bra? If it is not stuck down like a wrap, dirt will get in there and do damage like sandpaper.
2017 F3 Limited
2017 F3 Limited , Lamonster Black Dymond brake pedal with brake rod at #5 Pure Magnesium Metallic
-
Originally Posted by Highwayman2013
canamspyderaccessories.com has some good options.
Thanks for the link. Took a look; just a bit pricey.
-
-
Originally Posted by AY4B
I was wondering what was the purpose of a tank protector myself. Sport bike riders use them because they lay forward on the tank, on an F3 you dont. What is a tank bra? If it is not stuck down like a wrap, dirt will get in there and do damage like sandpaper.
Multi purposes. Should you decide to hold something in that position (small bag, water bottle, etc.), it is good to have a barrier to guard against undesired scuffs and scratches. I just think $50-100 is rather expensive compared to the tank pads and protectors I’ve had in the past with my sport bikes.
-
Very Active Member
Originally Posted by SpyderHands
Multi purposes. Should you decide to hold something in that position (small bag, water bottle, etc.), it is good to have a barrier to guard against undesired scuffs and scratches. I just think $50-100 is rather expensive compared to the tank pads and protectors I’ve had in the past with my sport bikes.
I actually use one of the tank protectors from canamspyderaccessories.com. It works very well, and only cost about $30-40. You can find one similar at a place like cycle gear, but they will normally not be as big, and not give as much coverage. I do not like the thought of using a tank bra, as it would be too hard to remove when cleaning underneath it. I also thought about doing a clear vinyl wrap, but I decided on the pad instead.
2021 RTL , brake pedal from "Web Boards" chalk white
-
Very Active Member
PROTECTION
OK I'll be serious and hopefully helpful ..... I have found numerous types of clear adhesive material on E-bay, that can be shaped using a heat gun or high temp hair dryer ..... There is thicker types that they call door and sill protective material ... I'll look and see if I've saved any of those links in my e-bay file ...... Mike
-
Originally Posted by blacklightning
I actually use one of the tank protectors from canamspyderaccessories.com. It works very well, and only cost about $30-40. You can find one similar at a place like cycle gear, but they will normally not be as big, and not give as much coverage. I do not like the thought of using a tank bra, as it would be too hard to remove when cleaning underneath it. I also thought about doing a clear vinyl wrap, but I decided on the pad instead.
I didn’t see any on the site for $30-40.
Using a tank bra isn’t an option for me. I’m looking for the vinyl pad “wrap” type of application.
Thanks for stopping by!!!
-
Very Active Member
wrapmyspyder.com also has tank protection but probably too much money.
2016 F3 Limited
2019 Ryker Rally
2014 Suzuki V Strom 650
2020 CSC TT 250
-
Blazing Member
www.wrapmyspyder.com love my custom tank protector from Pete .
-
Very Active Member
-
Very Active Member
Originally Posted by AY4B
I was wondering what was the purpose of a tank protector myself. Sport bike riders use them because they lay forward on the tank, on an F3 you dont. What is a tank bra? If it is not stuck down like a wrap, dirt will get in there and do damage like sandpaper.
We are all different shapes and sizes, AY. Because of my leg length, my knees rub on the F3-L painted ridge where the tank top joins the sides. As such, I need some kind of tank protector over that edge to prevent scuffing the finish. That is where I put the clear protector pieces that came with the F3-L (the ones that you are supposed to put on the frame near your boots)
Pete
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
Very Active Member
2015 F3's , two 12 volt power outlets Orange & Black
-
Active Member
TechSpec Snake Skin Grip
These aren't fancy, but they work. I applied them where my knees rub against the paint and they provide grip as well as cushioning. Easy to position and apply. According to the manufacturer: "The Snake Skin Grip Material is TechSpec's "Premier Product". Measuring at only .125" thick with a low profile diamond pattern. The rubber padding properties of these quality tank grips benefit you with a planted grip on your tank." The material can also be purchased in sheets and cut to your specifications. They come in black and clear. Like I said, they're not fancy, but they work and I'm very satisfied with the quality. I bought them last year off of Amazon for $52.00 with free shipping.
TechSpec 62-0049-SS Snake Skin Tank Grip
5.0 out of 5 stars 3 customer reviews
Price: $69.95 + $6 shipping
81LAC7n8r+L._AC_UL480_SR480,480_.jpg
IMG_20170521_190414.jpg
Last edited by LateLifeCrisis; 03-04-2018 at 12:53 AM.
He's on his RT She's on her F3
And the Keys to a Happy Marriage: Separate
Bathrooms, Individual Remote TV Clickers, and
His and Her Spyders.
"If there are no dogs in heaven, then when I die,
I want to go where they went." ~ ~ Will Rogers
"Never in the field of human conflict was so much owed by so many to so few."
~ ~ Winston Churchill in his tribute to the RAF.
"I'd like to know why well-educated idiots keep apologizing for lazy and complaining
people who think the world owes them a living." ~ ~ John Wayne
GOS 3799
-
Originally Posted by LateLifeCrisis
These aren't fancy, but they work. I applied them where my knees rub against the paint and they provide grip as well as cushioning. Easy to position and apply. According to the manufacturer: "The Snake Skin Grip Material is TechSpec's "Premier Product". Measuring at only .125" thick with a low profile diamond pattern. The rubber padding properties of these quality tank grips benefit you with a planted grip on your tank." The material can also be purchased in sheets and cut to your specifications. They come in black and clear. Like I said, they're not fancy, but they work and I'm very satisfied with the quality. I bought them last year off of Amazon for $52.00 with free shipping.
TechSpec 62-0049-SS Snake Skin Tank Grip
5.0 out of 5 stars 3 customer reviews
Price: $69.95 + $6 shipping
81LAC7n8r+L._AC_UL480_SR480,480_.jpg
IMG_20170521_190414.jpg
Thanks for the idea and link. The only thing is, I am wanting to start the tank pad protection coverage right where the seat and the plastic meet in the mid section.
-
I ordered from spiralus designs. I got the entire Frunk area and Tank for about 100.00. YOu can also get any wrap in clear if you don't want a color or design.Grey Spyder Tank wrap.jpgGrey Spyder Frunk wrap1.jpg
-
Active Member
Originally Posted by Peteoz
We are all different shapes and sizes, AY. Because of my leg length, my knees rub on the F3-L painted ridge where the tank top joins the sides. As such, I need some kind of tank protector over that edge to prevent scuffing the finish. That is where I put the clear protector pieces that came with the F3-L (the ones that you are supposed to put on the frame near your boots)
Pete
I have always wondered what the clear pads were for that come with your bike from the manufacturer.
17 F3 Limited (Pearl White), Sena 10C intercom, X Grip iPhone mount, IPS key, spyder to go cup holder, Lamonster Highway Center Lane, TricLED engine lights, TricLED night rider, LS2 Helmets, Lamonster Bypass pipe, 2 Brothers Exhaust, mirror relocator kit, Bluetooth radio module, OEM Backrest, Rear LED Light Kit
-
Active Member
Tank protection material.
I wonder what that clear plastic stuff that comes with your limited is, never got them? Anyhow, doesn't matter. What I used on my bike as well as the previous one was a clear plastic material that you can get from any sewing store (Joanne's, Micheal's) for pennies. It's in the fabric section and comes in various thicknesses. Cut it to shape, takes experimenting to get a flat wrap shape, wet it, apply and squeegee it out. The surface adhesion holds it in place. It stays real well and can be taken off easily without leaving anything behind. Not cheap, just frugal..... Of course, the ones you buy do look a whole lot nicer but this is transparent and not noticeable. Just another alternative.
-
SpyderLovers Sponsor
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|