-
I have the Stock Version WindShield
Looking for some options for a larger Windshield.. Mine a tad to short and the wind hits my helmet and I get the Helmet Wobbles at highway speeds.. Anyone have some suggestions ? Thanks..
Ride Safe..
Drink Free..
And if you drink call a cab !
-
Very Active Member
Originally Posted by rkba101
Looking for some options for a larger Windshield.. Mine a tad to short and the wind hits my helmet and I get the Helmet Wobbles at highway speeds.. Anyone have some suggestions ? Thanks..
Ride Safe..
Drink Free..
And if you drink call a cab !
I'll make you a great deal of 50% of list + shipping on the Can Am Blue Ridge Windshield with minimal usage from my F3's. I'll also make you the same 50% + shipping on the F4 windshield. Actual measurement from the very bottom to the top is 29.5" but it's call 28". It has approx 2-3" up & down adjustment.. If interested I will email photo's.
Darrell
Last edited by Wildrice; 12-24-2017 at 08:53 PM.
2015 F3's , two 12 volt power outlets Orange & Black
-
Originally Posted by Wildrice
I'll make you a great deal of 50% of list + shipping on the Can Am Blue Ridge Windshield with minimal usage from my F3's.
Darrell
that will fit mine? Any Pictures?
here is my email... rkba101@hotmail.com
Thanks OOOOO and Merry Christmas and God Bless.
-
Very Active Member
Maybe an option
I'm 6'3" & look clean over mine with it all way up, have not had any problems with bobble head from buffeting. Did come across this for my 2wheeler that just got a shield.
Still playing with adjustments, not sure if needed.
https://www.revzilla.com/motorcycle/...ndscreen-visor
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Blazing Member
What model Spyder do you have ?
-
Originally Posted by Bfromla
I'm 6'3" & look clean over mine with it all way up, have not had any problems with bobble head from buffeting. Did come across this for my 2wheeler that just got a shield.
Still playing with adjustments, not sure if needed.
https://www.revzilla.com/motorcycle/...ndscreen-visor
Thats kewl and inexpensive. Thanks..
-
Originally Posted by fastfraser
What model Spyder do you have ?
2013 "Not sure if year matters" St
-
Discount ?
Originally Posted by Bfromla
I'm 6'3" & look clean over mine with it all way up, have not had any problems with bobble head from buffeting. Did come across this for my 2wheeler that just got a shield.
Still playing with adjustments, not sure if needed.
https://www.revzilla.com/motorcycle/...ndscreen-visor
WOW, was curious and amazon search with this result..
https://www.amazon.com/PUIG-Clip-Vis...tem%3A+P265025
-
Very Active Member
Originally Posted by rkba101
Read the reviews. That price is for the shield only, no mounting hardware. Buyer beware.
-
Originally Posted by Navydad
Read the reviews. That price is for the shield only, no mounting hardware. Buyer beware.
Yes seen that while I was investigating WHY.. Thanks though.. Ride Safe and Merry Christmas..
-
Ultra Touring Windshield
I have a Spider Ultra Touring Windshield for sale. Part Number 219400354. Used about 2 months. $150.00 plus s/p. I also have the original stock windshield. $75.00 plus s/p.
I ride a lot even in winter and wanted as much protection from wind as possible. I ended with a Cal Science shield.
-
Originally Posted by Wildrice
I'll make you a great deal
Not that this is a contest..............
But I might have an even better deal.
I have a spare stock windshield off of an RT and I'm not too far from you.
IF the mounting is the same, you are welcome to come have a look at it.
-
Originally Posted by frenchbz
I have a Spider Ultra Touring Windshield for sale. Part Number 219400354. Used about 2 months. $150.00 plus s/p. I also have the original stock windshield. $75.00 plus s/p.
I ride a lot even in winter and wanted as much protection from wind as possible. I ended with a Cal Science shield.
Is this the one ?
https://smile.amazon.com/Can-Am-2194...ords=219400354
-
Originally Posted by Easy Rider
Not that this is a contest..............
But I might have an even better deal.
I have a spare stock windshield off of an RT and I'm not too far from you.
IF the mounting is the same, you are welcome to come have a look at it.
How long is it or I guess height? I will measure from the bottom of mine to the top and we can compair.. Where are you in Florida ? I see North Central but you know that doesnt help alot.. Im in Green Cove Springs..
Thanks .. God Bless and Ride Safe Please..
-
Originally Posted by rkba101
How long is it or I guess height?
It is about 23 inches tall.
But is from an RT and might be an entirely different animal.
I'm in Ocala.
-
Originally Posted by Easy Rider
It is about 23 inches tall.
But is from an RT and might be an entirely different animal.
I'm in Ocala.
Local Dealer not open this week.. Oyie, wish I worked there.. LOL
Would ride down there tomorrow/ actually today now but it is COLD !
Hummm.. Will call dealer tuesday and ask if they have any idea.. What year RT ? Not sure if that will make a difference or now, but nice to have all the info just incase..
Phil..
-
Originally Posted by rkba101
What year RT ?
It's a '17.....but the shields for the RT have been the same for a LONG time, maybe forever.
-
Active Member
touring windshield
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|