-
Cell Phone Charger
Looking to take our second road trip this spring, we just stayed local on our first one. I was wondering if there is a way to run a cell phone charging cable up to the handle bars? I am looking to get an X grip etc. My Zumos worked well on the local trip but i dont know if I want to spend the money to update it. Thanks guys
Dave
-
on my RT-S I removed the temp and fuel gauges and installed a dual usb port on one side and a volt meter on the other. used the existing wiring.
-
Very Active Member
2016 F3 Limited
2019 Ryker Rally
2014 Suzuki V Strom 650
2020 CSC TT 250
-
Very Active Member
mine
try any of these.....
https://www.ebay.com/sch/i.html?_fro...Black&_sacat=0
i've had mine for over a year, and it works great....
![](https://i.ebayimg.com/thumbs/images/g/JiIAAOSwUchZ~ISw/s-l200.jpg)
you may also want to order a 9 inch power cable while you are at it....
Dan P
SPYD3R
-
Very Active Member
I added a dual usb port to one of the speaker grilles, and a regular 12V outlet to the other speaker grille. I use them for the phone and the GPS. Wired so that it's powered with key on. Many have also replaced the analog gages as mentioned above.
2021 RT Limited
![](signaturepics/sigpic17423_8.gif)
-
Very Active Member
You don't tell us year and model of Spyder. FWIW, if you wanted/needed to keep your gauges there is a wire harness connection behind the left side of the frunk on the '14 and later RTs (don't know about earlier RTs) for those who want a 12v cigarette or USB port in the frunk. You could run a cable from that connection point to wherever you desired in the vic of handlebars. Were I in your boots I'd do the voltmeter/USB replacement of the gauges, although with a 1330 engine I don't really see a need for a voltmeter.
Artillery lends dignity to what would
otherwise be a vulgar brawl.
******************************
Cognac 2014 RT-S
-
Very Active Member
Phone Charger
If you have a Battery Tender connection in your frunk, there is an accessory that you can use to charge your phone or GoPro.
![](signaturepics/sigpic22913_2.gif) 2015 RTL, BajaRon Swaybar, LaMonster LED Headlights and Foglights, LaMonster Spydercuff, LaMonster LED mirror wrap, Magic Mirrors, HMT Brake Light
-
Model
![Quote](images/misc/quote_icon.png) Originally Posted by JayBros
You don't tell us year and model of Spyder. FWIW, if you wanted/needed to keep your gauges there is a wire harness connection behind the left side of the frunk on the '14 and later RTs (don't know about earlier RTs) for those who want a 12v cigarette or USB port in the frunk. You could run a cable from that connection point to wherever you desired in the vic of handlebars. Were I in your boots I'd do the voltmeter/USB replacement of the gauges, although with a 1330 engine I don't really see a need for a voltmeter.
My spyder is a 2013 RT Limited if that helps
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|