I found the best LED headlight bulbs!

[TexasZ]

For $30 I just purchased a set of H4 for my wife's F3. Hopefully, they will be better than the other ones I tried. With LED COBs on 4 sides, these should work much better than the 2 sided ones I tried last time.

Please give us a review once you get them installed and try them out.

[Ericcny]

I've been doing the same thing and settled for these. 252W and 25200 lumens for the pair. Three sides and hi/low.

http://www.ebay.com/itm/H4-252W-2520...item23882b6199

[KX5062]

I would take it out and look at the bulb ..... I have a 14 RT .... the owner's manual Bulb info was WRONG - it's an HB3 or 9005 , like Joel said .... I don't think they ever changed the North American bulb spec's ......... Mike

I have seen older RT's with a headlight assembly that looks the same, but is not shuttered. They had the conventional high/low lamps. I don't know why or what year or years. I'm sure someone can chime in, but I've definitely seen several older RT's that way.

[Bob Denman]

Only the RTs had the shutters.

[AY4B]

Thats a really nice wrap on your Spyder. Where did you get it? I have that same color ST and have always thought it was a hard color to find a wrap for and look right.

[Joel The Biker]

Thats a really nice wrap on your Spyder. Where did you get it? I have that same color ST and have always thought it was a hard color to find a wrap for and look right.

My wrap came from World Class Wraps

[larryd]

Thats a really nice wrap on your Spyder. Where did you get it? I have that same color ST and have always thought it was a hard color to find a wrap for and look right.

I've seen Joel's bike in person and the pictures do not do this wrap the justice it deserves. It is FANTASTIC looking...larryd

[Bob Denman]

I've seen Joel's bike in person and the pictures do not do this wrap the justice it deserves. It is FANTASTIC looking...larryd

[Schwingel9]

Just wondering if these would work in an f3? The f3 calls for a hb2 bulb. Thanks!

[BLUEKNIGHT911]

Just wondering if these would work in an f3? The f3 calls for a hb2 bulb. Thanks!

They label different bulbs to FIT different sockets .... so an HB3 /9005 is not very likely to fit an HB2 ...... Early in this post Joel listed the manufacturer of the Bulb and WHO sold it on E-bay ...... so go back on E-bay and see if the seller also has this bulb in an HB2 base ...... Mike

[MercerLake]

Fast service from E-bay. However, I had assumed (dangerous) that they were dual element replacements Hi/LO, NOT they are only a single element for a two bulb setup for HI/LO. They would be perfect for any of the with shutters. But my 2015 ST has a single bulb with HI/LO filaments, but they will fit my cage. They do appear to be well made and I'll see how they last.

[BLUEKNIGHT911]

Fast service from E-bay. However, I had assumed (dangerous) that they were dual element replacements Hi/LO, NOT they are only a single element for a two bulb setup for HI/LO. They would be perfect for any of the with shutters. But my 2015 ST has a single bulb with HI/LO filaments, but they will fit my cage. They do appear to be well made and I'll see how they last.

Some LED's can be damaged if wired the wrong way...... or you short circuit them otherwise they have a life usually in excess of 30,000 hrs ...... Mike

[BLUEKNIGHT911]

Sooooooooo have you driven in the DARK yet , and if so how are they ..... Mike

[Joel The Biker]

Fast service from E-bay. However, I had assumed (dangerous) that they were dual element replacements Hi/LO, NOT they are only a single element for a two bulb setup for HI/LO. They would be perfect for any of the with shutters. But my 2015 ST has a single bulb with HI/LO filaments, but they will fit my cage. They do appear to be well made and I'll see how they last.

Why didnt you order the correct fitment for your ST? They are available in most of the popular sizes. I only posted the link to the 9005's.

[Joel The Biker]

Ok, here they are:

Spyder RS and GS headlights http://www.ebay.com/itm/YITA-H7-120W...1XkJpY&vxp=mtr

Spyder F3 and ST headlights http://www.ebay.com/itm/YITA-2pcs-80...dZHU4H&vxp=mtr

Spyder RT headlights http://www.ebay.com/itm/YITA-2PCS-12...xXbKoL&vxp=mtr

Spyder RT foglights http://www.ebay.com/itm/YITA-H11-LED...xXbitY&vxp=mtr

NOTE: The cam plate on the bulb can be removed to fit the rubber cover on the back of headlights. On the RT, the stock hard cover fits, but its tight.

There, now I shouldn't be getting a million PM's asking if they fit.

[Joel The Biker]

Sooooooooo have you driven in the DARK yet , and if so how are they ..... Mike

I will try to get some pictures or video and post it here tonight.

[MercerLake]

Why didnt you order the correct fitment for your ST? They are available in most of the popular sizes. I only posted the link to the 9005's.

Why? I often ask myself why didn't I read the full info or question. I have further investigated for the CORRECT bulbs for my ST and they are out of stock, but the 9005 units will fit one of our cages and I will reorder. Thanks for pointing me in the right direction. BTW your trike looks awesome, but no one has ever said that, right!!

[wyliec]

Only the RTs had the shutters.

I have a 2008 GS, and it has shutters, and single filament bulbs.

[Joel The Biker]

Here ya go. Low beam and high beam. No funny business or doctored photos. I love them! They are keepers!!! They are far brighter than any other LEDs I have tried!
IMGP0223.jpgIMGP0224.jpg

[Bob Denman]

Hot Damn!