-
Spyder Sightings on the road to Valcourt
We left from Hurricane UT on Tuesday and spent the first night in Fort Morgan CO didn't see any Spyders that day. On Wednesday at our first gas stop we met Bob and his wife (who's name I didn't get) who are from the Denver area. They aren't on spyderlovers or Facebook but have owned their Spyder for a few years.
We spent last night in the Des Moines Iowa area and we saw a group 5 or 6 Spyders with Iowa plates on the interstate.
If you're on your way to Valcourt and you run into other Spyders post your sightings here.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
-
Very Active Member
-
Very Active Member
Ride safe
Originally Posted by SpyderAnn01
We left from Hurricane UT on Tuesday and spent the first night in Fort Morgan CO didn't see any Spyders that day. On Wednesday at our first gas stop we met Bob and his wife (who's name I didn't get) who are from the Denver area. They aren't on spyderlovers or Facebook but have owned their Spyder for a few years.
We spent last night in the Des Moines Iowa area and we saw a group 5 or 6 Spyders with Iowa plates on the interstate.
If you're on your way to Valcourt and you run into other Spyders post your sightings here.
Ride safe guys. If you need anything in the western Ny area give me a shout.
2022 RT Limited Dark Hyper Silver
2014 RT-S Pearl White
2010 BRP 622 Trailer Pearl White
-
SpyderLovers Sponsor
Saw Iowa folks again!
Ran into the Iowa crew again! At a gas station, had a chance to chat. They are going to Niagra Falls! Must be crazy! We made Apalachin, NY. 600 miles or so. Flawless machines! A tiny bit of rain, some spray, clouds, gray. Looping thru the Eastern provinces, then back west to Valcourt. Fun!!!
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Heading to Maine today then St Johns NB on Sunday. Will spend two nights in Nova Scotia to do the Cape Breton loop then two days to ride to Valcourt
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Today we saw a blue RT headed west near Albany NY.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
I stopped at Kalamazoo for fuel & eats and as I was turn I right I saw a viper red RT going the other direction. Don't know if the were traveling or local.
-
Registered Users
Originally Posted by cptjam
Ran into the Iowa crew again! At a gas station, had a chance to chat. They are going to Niagra Falls! Must be crazy! We made Apalachin, NY. 600 miles or so. Flawless machines! A tiny bit of rain, some spray, clouds, gray. Looping thru the Eastern provinces, then back west to Valcourt. Fun!!!
Apalachin NY is my old stomping grounds....grew up in Vestal! We are heading out in the morning from Virginia heading north to Valcourt
** Loving my 6th Can-Am Spyder since 2007! **
-
Very Active Member
-
I'm leaving for Valcourt on Wednesday morning - meeting a couple friends in Sykesville, MD and we are spending one night near Albany, NY. We will arrive in Valcourt on the 1st of June. Back roads the whole way.
-
Spyders in Pembroke Ontario Saturday
On our way to Valcourt. Sat at a Boston pizza 16 Spyders from Gatineau Qc were out for their Sat ride. Not going to Valcourt this year as some had met a group from France last year and BRP gave them the pre 10th tour. We will be in Valcourt tomorrow. Will see you there. Bob
thumbnail_DSCN5046.jpgthumbnail_DSCN5047.jpgthumbnail_DSCN5048.jpgthumbnail_DSCN5049.jpg
-
We will be leaving the Syracuse, NY area Wednesday night heading to Lake George, NY. Anyone wanting to meet up with us in Lake George and ride the rest of the way, let us know.
Wendy and John
-
Today we rode to Bar Harbor and saw one Spyder heading the opposite direction. I'm thinking they were local.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Very Active Member
Leaving Thursday morning. Unfortunately in the cage. Wife can't ride yet. One month from total knee replacement. It wasn't planned this way that's for sure. Patti see you in Valcourt. Or Drummandville. Tom
Baloo is my name. Spyders are my game. Well, it's a doo-bah-dee-doo, yes, it's a doo-bah-dee-doo, I mean a doo-bee, doo-bee, doo-bee, doo-bee, doo-bee-dee-doo. And, well, now. Ha ha! What have we here?
2020 Petrol Blue Metallic RTL
-
Very Active Member
Ty for the post it's a good idea!
Live, Love, and Ride! God Bless!
-
Very Active Member
On the way to Johnson Creek, we pulled off the highway for gas and ran into Lamont and Joan. Also had a nice gentleman, Larry, catch up to us as we were gassing up near Vail. He was riding an RT-Ltd. You know what Lamont and Joan ride.
-
I was near St. Clair, Mich this afternoon and way a man on a white Spyder (RT, I think) going the opposite way. No trailer, packs, etc. I think he was local.
Then when I got back to the hotel there were two couples from near Kansas City, Mo on their way to Homecoming.
-
Active Member
Should have stopped for a chat. I live on the west far outskirts of Metro Detroit. There are about 10 of our group going up. 8 of us leaving Wednesday am.
Originally Posted by PrairieSpyder
I was near St. Clair, Mich this afternoon and way a man on a white Spyder (RT, I think) going the opposite way. No trailer, packs, etc. I think he was local.
Then when I got back to the hotel there were two couples from near Kansas City, Mo on their way to Homecoming.
2014 Can Am Spyder RT Limited - Pearl White
2010 Can Am Spyder RT - Full Moon
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|